WebSTAR DPR2320 and EPR2320 Gateway Cable Modems User’s Guide
Configuring Your Wireless Access Point Parameters
Use the Setup Wireless – Basic page to configure your wireless access point (WAP) parameters, included SSID and channel number.
If you are not familiar with the advanced settings detailed in this section, contact your cable service provider before you attempt to change any of the gateway cable modem default wireless basic settings.
Click Basic in the Wireless section of the Setup page to access the Setup
Wireless – Basic page.
Setup Wireless – Basic Page Example
The following illustration is an example of the Setup Wireless – Basic page showing the factory default settings.
System Signal Status
Log
Setup
Setup
Wireless - Basic
This page allows you to configure your wireless access point parameters, including SSID and channel number.
Service Set Identifier (SSID)
Basic Service Set Identifier (BSSID)
Country:
New Channel:
WebSTAR
00:0a:73:9e:be:77
USA
1
Current Channel: | 1 |
|
Encryption Mode: | No Encryption | |
Access Point: | On | Off |
Apply
62