Table 3-2: Status - Resetting the Configuration
LED Condition | Description |
|
|
Alternating Green/ | While the Reset button is held in, the status |
Red | light will begin to blink in this sequence to |
| indicate the |
| restore the factory default condition. |
| If you do not want to restore the factory |
| default, release the button before the |
| sequence changes to Green/Yellow. |
|
|
Alternating Green/ | While the Reset button is held in, the status |
Yellow | light will begin to blink in this sequence to |
| indicate the factory default configuration was |
| restored. Once the |
| indicates the configuration was restored, you |
| can release the reset button. |
|
|
Table |
LED Condition | Description |
|
|
Alternating Green/Red | A serious system error occurred. See the |
| system log for more details. |
|
|
Alternating Green/ | The current configuration is corrupt and |
Yellow | the factory default configuration is being |
| used |
|
|
Solid Red | The |
| fatal error, contact technical support for |
| assistance. |
|
|
•ETHERNET ‐ Indicates the status of the Ethernet connection (RJ‐45 port).
Table 3-4: Ethernet
LED Condition | Description |
|
|
Solid Green | The Ethernet link is available and |
| idle. |
|
|
Green/Yellow | Network traffic is detected. |
Blinking |
|
|
|
Off | The Ethernet link is unavailable. |
|
|
•PHONE ‐ Indicates the status of the phone port (RJ‐11).
|
|
|
|
|
|
|
Rev 3.0 B 2/15/08 |
|
|
|
|
| 17 |
|
|
|