Figure 2-3: RJ-11 IP Gateway: Welcome - Device Server Information
•Ethernet Address : MAC Address of the RJ‐11 IP Gateway.
•IP Address : The current IP Address of the RJ‐11 IP Gateway and how the IP address was assigned (in the example, a Raven‐E in Public Mode used DHCP to give the RJ‐11 IP Gateway the IP addressed assigned by the cellular network).
•IP Netmask : The current subnetmask of the RJ‐11 IP Gateway and how the device obtained it.
Serial Settings
•The Serial Settings page allows you to specify the baud rate, protocol, character size, parity, stop bits, and flow control behavior for the RJ‐11 port (Phone).
Note: For most configurations, the default settings (shown in the screen shots) are best. Change these parameters only if you know the device you will be connecting to the
|
|
|
|
|
|
|
Rev 3.0 B 2/15/08 |
|
|
|
|
| 25 |
|
|
|