Sierra Wireless RJ-11 manual Important Notice Safety and Hazards Limitation Liability

Page 3

Important Notice

Safety and Hazards

Limitation of

Liability

Rev 3.0 B 2/15/08

Due to the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost.

Although significant delays or losses of data are rare when wireless devices such as the Sierra Wireless AirLink Product Name are used in a normal manner with a well‐constructed network, the Sierra Wireless AirLink Product Name should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. Sierra Wireless accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the Sierra Wireless AirLink Product Name, or for failure of the Sierra Wireless AirLink Product Name to transmit or receive such data.

Do not operate the Sierra Wireless AirLink Product Name in areas where blasting is in progress, where explosive atmospheres may be present, near medical equipment, near life support equipment, or any equipment which may be susceptible to any form of radio interference. In such areas, the Sierra Wireless AirLink Product Name MUST BE POWERED OFF. The Sierra Wireless AirLink Product Name can transmit signals that could interfere with this equipment.

Do not operate the Sierra Wireless AirLink Product Name in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, the Sierra Wireless AirLink Product Name MUST BE POWERED OFF. When operating, the Sierra Wireless AirLink Product Name can transmit signals that could interfere with various onboard systems.

Note: Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is open. Sierra Wireless AirLink Product Name may be used at this time.

The driver or operator of any vehicle should not operate the Sierra Wireless AirLink Product Name while in control of a vehicle. Doing so will detract from the driver or operatorʹs control and operation of that vehicle. In some states and provinces, operating such communications devices while in control of a vehicle is an offence.

The information in this manual is subject to change without notice and does not represent a commitment on the part of Sierra Wireless. SIERRA WIRELESS AND ITS AFFILIATES SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL

1

Image 3
Contents User Guide Page Important Notice Safety and Hazards Limitation Liability Patents Copyright Trademarks Contact Information Support@sierrawireless.comContents AT Commands Introduction RJ-11 IP Gateway FeaturesRJ-11 Gateway with an AirLink Raven-E and a Modem Router RJ-11 IP Gateway FeaturesQuick Start Before You StartSoftware Required Hardware Required Important Information about Ports Configuring your Raven X for the RJ-11 IP GatewayDefault settings Cellular Account RequiredWireless Ace Connexion Connect Configuring the RavenWireless Ace PPP/Ethernet Configuring the RJ-11 IP Gateway DefaultsSelect Network Settings from the menu on the left 192.168.1.3 255.255.255.0 10 RJ-11 IP Gateway Serial Settings 11 RJ-11 IP Gateway Reset/Reboot DocTitleHeader 2120028 Connectors and Reset button Hardware SetupStatus Normal Operation Status LEDsStatus Resetting the Configuration Phone Specifications Physical DimensionsConnections Phone and Modem standards Environmental ConditionsOptional Mounting Bracket Mounting BracketSupport Hardware 2120028 Web-based Interface Web InterfaceWelcome Service ConfigurationRJ-11 IP Gateway Welcome Device Server Information Serial SettingsRJ-11 IP Gateway Serial Settings Port ServicesRJ-11 IP Gateway Port Services RJ-11 IP Gateway Network Tnaslation Network TranslationRJ-11 IP Gateway Protocol Settings Protocol SettingsNetwork Settings Network ConfigurationHost RJ-11 IP Gateway Network Interface Settings DNS Settings IP Routing RJ-11 IP Gateway DNS Settings10 Host RJ-11 IP Gateway IP Routing 11 Host RJ-11 IP Gateway Time Settings Time SettingsSecurity Settings 12 Host RJ-11 IP Gateway Security Settings 13 RJ-11 IP Gateway Online Update -top half Online Update14 RJ-11 IP Gateway Online Update middle Status and Logs TroubleshootingSystem Log 16 RJ-11 IP Gateway Troubleshooting17 RJ-11 IP Gateway System Log Port StatusOS and Network Information Log Files and Settings19 RJ-11 IP Gateway Log Settings Ping CommandsReset/Reboot 22 RJ-11 IP Gateway Reset/Reboot Hardware 2120028 Port Settings AT CommandsTermination REASON......DTR Loss Registers Response CodesModem Signal Behavior Phone Numbers Mode Modem DCD Settings BehaviorPort Settings

RJ-11 specifications

Sierra Wireless RJ-11 is a versatile and robust solution designed for various communication needs in the IoT landscape. This compact device encapsulates the combination of advanced technologies and user-friendly characteristics, making it a favorable choice for applications requiring reliable and efficient data transmission over voice-grade telephone lines.

One of the most notable features of the Sierra Wireless RJ-11 is its ability to connect devices to the internet through standard telephone lines. This capability is particularly beneficial in regions where broadband access is limited or unavailable. The RJ-11 effectively transforms traditional landline networks into an accessible medium for IoT applications, providing seamless connectivity for remote monitoring and control.

Equipped with Sierra Wireless' AirLink technology, the RJ-11 offers a significant advantage in terms of cellular connectivity. Users can take advantage of the device’s support for multiple frequency bands, ensuring compatibility with various cellular networks worldwide. This characteristic is crucial for deployments that span across different geographic locations, as it allows for global connectivity without the need for extensive modifications.

The RJ-11 boasts a user-friendly interface that simplifies installation and configuration. With its plug-and-play design, the device can be easily integrated into existing systems without the necessity for comprehensive technical expertise. This ease of use is complemented by a range of software tools provided by Sierra Wireless, which facilitate remote management, monitoring, and updates. By leveraging cloud-based solutions, users can ensure their devices are operating optimally and securely.

In terms of performance, the Sierra Wireless RJ-11 is engineered for longevity and reliability. It is built to withstand various environmental conditions, making it suitable for outdoor deployments. The device offers energy-efficient operation, which is crucial for field applications where power resources may be limited.

Security is a priority with the Sierra Wireless RJ-11, as it incorporates robust encryption and secure data transmission protocols. This focus on security not only protects sensitive information but also enhances user confidence in deploying the device across critical applications.

Overall, the Sierra Wireless RJ-11 stands out as an innovative solution that bridges the gap between traditional telephony and modern IoT requirements. With its combination of easy deployment, global connectivity, and security features, it caters to a wide array of industries, from healthcare to agriculture, ensuring reliable communication in the evolving digital landscape.