Sierra Wireless 555 manual Watcher Dial-Pad, Dial Pad Function Buttons

Chapter 13: Voice Connections

Table 13-1: The Watcher Dial-Pad

Dial Pad	Function
Buttons
0-9, #, *	Use these buttons to enter the digits (and other
	characters) you want to dial. The numbers are
	displayed in the call status area until you tap
	SEND, END, or CLR, or you receive an
	incoming call.
	Any of these buttons can be used to answer an
	incoming call if the Any-Key Answer feature is
	enabled.
	If you tap these buttons during a call, the
	AirCard beeps and the characters are displayed
	in the call status area.
SEND	Use this button to dial and to answer incoming
	calls. When you are not receiving an incoming
	call, tapping SEND dials the numbers in the call
	status area. If no numbers are displayed,
	Watcher re-dials the last number you dialed.
END	Use this button to hang-up or end a call, or to
	clear all the digits and characters in the call
	status area (i.e. to cancel a call that you’ve
	started to enter). This button also clears status
	messages.
CLR	Use this button to clear the last number you’ve
	entered. If you hold this button down for one
	second, it has the same effect as the END key.
	This button can also be used to hang-up or end
	a call.
Volume	Use the Up Arrow to increase the headset
Buttons	volume you hear. Use the Down Arrow to
(Up Arrow and	decrease the volume. When there is no call in
	progress, use these buttons to adjust the
Down Arrow)	volume of the beep that occurs when you tap
	the dial pad buttons.
Mute Button	Use this key during a call to prevent the caller
	from hearing what you say.
	When no call is in progress, this key enables
	and disables the Silent Ringer feature.

Installation and Use on Handheld/Pocket PCs

Rev 3.3 May.02 137