Sierra Wireless MP215 manual Amps Provisioning

Page 24

MP215 Mobile Modem

Installation, Configuration, and User’s Guide

5.2. AMPS Provisioning

The Modem is configured for AMPS operation, including NAM (cellular number) and CS-CDPD Dial Code (1-800 number), from the following screen:

Programming the NAM (the MP215’s cellular number)

Click on ‘Setup’ beside the NAM window. The following screen will appear:

Enter the phone number and home system ID, as provided by your cellular carrier, and click OK.

Sierra Wireless, Inc.

05/11/99

5-2

Image 24
Contents MP215 Modem Page Important Notice Regulatory Information Customer Service Contents Operating the MP215 via Watcher Figures Tables Page Overview CS-CDPDMP215 Operating Modes MP215 Wireless Expert and Watcher MP215 Host InterfaceMP215 Installation Installing the Modem in a VehicleInstalling the Cellular Antenna Connecting the Serial CableWarranty Registration External Interfaces Host interfacePower Supply Interface and On/Off Control DB-9 FemalePower Connector Pin-out cable side Modem Status Indicator SpeakerI/O Connector RF Antenna ConnectorMating Connector Suggestions Speaker SuggestionsSierra Wireless Inc 05/11/99 Installing MP215 Firmware and Utility Software Installing MP215 FirmwareInstalling Wireless Expert and Watcher Software Configuring the MP215 With Wireless Expert SetupAmps Provisioning Programming the Dial Code Cdpd provisioningNEI and Side Preference DNS Configuration Configuring the MP215 via AT Commands Configuring the MP215 for CSC modeProgramming the NAM Programming the CS-CDPD Modem Bank Dial CodeAutoswitch Provisioning Maxidle TimerAutocheck Timer Programming the Channel Side PreferenceMaxcdpdscan Timer Maxcdpdlost TimerCDPDPresence Timer Page Operating the MP215 via Watcher CS-CDPDSierra Wireless, Inc 05/11/99 Operating the MP215 via AT Commands Page Host Interface General DescriptionAT Command Specifics AT Commands Command WS181+WPREG Registers and +WS registers