Sierra Wireless MP215 manual Programming the Dial Code, Cdpd provisioning, NEI and Side Preference

MP215 Mobile Modem Installation, Configuration, and User’s Guide

5.3. Programming the Dial Code

Click on setup beside the Dial Code window. A window similar to the one above will appear. Enter in the 1800 number and system ID as provided by your CS-CDPD service provider, and click OK.

5.4. CDPD provisioning

NEI and Side Preference

The MP215’s NEI (IP address) and Channel Side preference are configured via the following Wireless Expert screen:

To provision the NEI, click on the Setup button, and the following window shown below will appear. Enter the IP address, as provided by your CDPD service provider, and click OK.

To provision the side preference, determine from your carrier which channel side preference is required and use the drop down menu to select the correct preference.

PN 2110036 Revision 1.0 05/11/99 5-3