Sierra Wireless MP 875 manual Install the MP modem, Mount the MP modem, Mounting the MP modem

Page 27

Note: Power off the MP modem, your computer, and any other devices while you are connecting cables.

Rev 1.5 Jul.08

Hardware and Software Installation

4.Connect the cable that runs between the MP modem and your computer to the MP modem.

Do not connect the cable to the computer until you have installed the software.

5.Install the software.

6.Start 3G Watcher and activate your account.

7.Test the system.

Install the MP modem

Step 1—Mount the MP modem

If you are using the MP modem in a vehicle, it is usually mounted in the trunk, but other possibilities are under the dashboard or a seat.

Select a location for the MP modem

When selecting a mounting location, remember the following:

•Do not expose the MP modem to weather and environ‐ mental conditions beyond the ranges listed in the environ‐ mental specifications on page 74. Avoid excessive heat from the engine compartment, heaters, or the exhaust system, and extreme cold from direct contact with air conditioners or other cooling systems. Never immerse it in any liquid.

•If you are replacing an MP modem, you can mount the new MP modem in the same location using the existing mounting holes.

•Every device connected to the MP modem, as well as the MP modem itself, should be grounded. (See “Ground the MP modem” on page 28 and “Ground the power harness” on page 34.)

•Route cables to their destinations without using excess wiring.

•Make sure all connectors and the reset button are easy to reach and the indicator lights are visible.

Mounting the MP modem

To mount the MP modem:

1.Use the provided mounting template to mark the location of the mounting holes.

2.Drill 5/32ʺ pilot holes (unless you are reusing holes from a previous MP modem mounting).

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents User Guide Page Important Notice Safety and Hazards Limitation Liability Qualcomm 3G Patents CopyrightTrademarks Contact Information Support@sierrawireless.comRevision History Directing users to the MP 3G Modems AT Command ReferenceContents MP Modem Operation Configuring the Router Functions Support and Warranty Regulatory Information MP875 Modem User Guide 2130808 Introducing the MP Modem Accounts and coverage Network connectionsConnection methods Virtual serial portSupported GSM radio frequencies Software VPN support for RnapMP Modem Manager DocumentationMP875 Modem User Guide Getting Started Plan your MP modem installation Where do you want to install your MP modem?What type of connections do you plan to use? Getting Started Package contents Required equipmentAdditional required equipment System requirements MP modem accessoriesMP875 Modem User Guide 2130808 Hardware and Software Installation Installation overviewMP modem housing Connector panel Overview of installation stepsGPS and I/O options Mounting the MP modem Install the MP modemMount the MP modem Select a location for the MP modemGround the MP modem Main RF antenna Mount the antennas and install the cablesGPS antenna MP 595880W onlyAntenna locations Install the antennas and cables Install the power harnessIgnition sense on/off wiring Power connectorPower connector Molex pinouts Vehicle installationIgnition sense options Crimp terminals Ground the power harnessPower connections Correct wire splicingConnect the MP modem to computer cable Office installationInstall the USB, Ethernet or serial cable Serial connector DB9 pinoutsInstall the software Configure your accountPort connections 10 Placing a SIM card into the sled Insert the SIM CardCreate a profile Set up connection profiles· User Name Test the system MP875 Modem User Guide 2130808 Turning the MP modem on and off MP Modem OperationLED operation Status indicatorsReset the MP modem 3G Watcher software3G Watcher Help Launching 3G Watcher Connection to MP Physical InterfaceChanging the Physical Interface 3G Watcher window Establishing connectionsYou now have DUN connection Auto-Connect for DUNNAT mode Configuring the Router FunctionsNAT mode Non-NAT modeMode MP modem networking basics in NATFile and resource sharing over LAN Static IP and TCP/UDP port forwarding in NAT modeEnable the router Set up static IP addressesSet up TCP/UDP port forwarding MP875 Modem User Guide 2130808 GPS configuration and reporting Configuring the MP Modem to Report GPS and I/O DataGPS display in 3G Watcher GPS protocols and commandsGPS Taip quick reference Device installation and configurationConnector pinouts Port specificationsDigital input devices Example panic button connections A button wired to Pin 4 digital input and Pin 10 GroundAnalog input devices Digital output devicesExample analog sensor connections Configuration using AT or 3G Watcher commandsExample Analog input setupDigital I/O setup MP875 Modem User Guide 2130808 Route data to a server Configure the MP modem toReport frequency timers Sending Data to Your Network ApplicationTmsumregind Sending Data to Your Network Application IP Addressing Monitoring and Tracking configurationProblem created by Network Address Translation Retrieve the Unique Mobile Device ID Solutions to the NAT problemSupport and Warranty WarrantyTechnical support MP875 Modem User Guide 2130808 Regulatory, radio frequency and electrical specifications Technical SpecificationsWeight and dimensions Environmental specificationsOther interfaces GPS specificationsPort characteristics Host interfacesWPA2 Wireless access point specificationsCanada Regulatory InformationEuropean Union FCC CautionNumerics IndexMTP Index MP875 Modem User Guide 2130808

MP 875 specifications

The Sierra Wireless MP 875 is a cutting-edge device designed to cater to the needs of modern IoT applications and mobile networking solutions. This rugged mobile router stands out for its robustness, versatility, and advanced features, making it an ideal choice for industries such as transportation, public safety, and remote work environments.

At the heart of the MP 875 is its support for both LTE and advanced LTE-A technologies, providing high-speed internet access with speeds reaching up to 300 Mbps. This enables seamless connectivity for multiple devices, supporting applications such as video streaming, real-time data transfer, and cloud-based solutions. The dual-SIM capability enhances network reliability and allows for automatic failover, ensuring continuous connectivity even in remote locations.

One of the key characteristics of the MP 875 is its rugged design, built to withstand tough environmental conditions. The IP67-rated casing ensures protection against dust and water, making it suitable for deployment in harsh outdoor settings. Its wide operating temperature range further enhances its versatility, allowing it to function effectively in extreme heat or cold.

Another notable feature is the onboard Wi-Fi, which supports both 2.4 GHz and 5 GHz bands, enabling the connection of multiple devices with minimal interference. This dual-band functionality provides users with the flexibility to optimize their wireless connections based on their specific requirements. Additionally, the MP 875 includes comprehensive security features, such as VPN support, firewall protection, and advanced encryption protocols to safeguard sensitive data.

Moreover, the device supports various IoT applications, including fleet management, asset tracking, and telemetry. With built-in GPS capabilities, users can easily track the location of their assets or vehicles in real-time, enhancing operational efficiency and safety.

The MP 875 also boasts a user-friendly management interface, allowing for straightforward configuration and monitoring of devices. Remote management capabilities facilitate streamlined updates and troubleshooting, reducing downtime and improving overall productivity.

In conclusion, the Sierra Wireless MP 875 is an advanced mobile router that excels in providing reliable, high-speed connectivity in a rugged form factor. Its blend of LTE technologies, robust design, and comprehensive security features makes it an exceptional choice for businesses looking to leverage the power of IoT and mobile networking. Whether for transporting goods, managing public safety operations, or enabling remote work solutions, the MP 875 is a reliable partner for modern connectivity needs.
Top Page Image Contents