Sprint Nextel MAX-206M2 manual Modem LED Display front panel

Modem LED Display (front panel)

Your XOHM Modem

WiMAX	Signal Strength	Phone 1 & 2	LAN 1 & 2	Power
Signal	Indicator	[future service]

1.WiMAX LEDs: The leftmost LED indicates WiMAX connectivity. A blinking LED indicates that the unit is ranging, while a solid LED indicates that a connection has been established and that the modem is ready to transmit and receive. The three LEDs to the right indicate the signal strength of the reception (1-3). These LEDs will be green when illuminated.

Note

Signal Strength LEDs: The number of signal strength LEDs illuminated reflects the strength of the WiMAX signal being received by the XOHM Modem; however, the strength of signal does not affect the speed of your connection. As long as there is sufficient signal strength to make a connection, you may achieve maximum connection speed. (For more information about signal strength, see “XOHM WiMAX Signal Strength” on page 20.)

2.Phone 1 / Phone 2 LEDs: Illuminates when the VoIP phone “line” is in use. If no voice accounts are configured, the LED will be off. If a voice account is configured and registered, the LED will be green. When the connected phone is off-hook, the LED will blink. When there is new voicemail on the account, the LED will be amber (optional). [Future service.]

3.LAN 1 / LAN 2 LEDs: Illuminates when the modem is connected to the computers or other networking devices. This LED will be green, and will flash as data is sent through the connection.

Your XOHM Modem 5