Procom CGA7740N manual Configuring the Wireless Modem Router

4 Configuring the Wireless Modem Router

Advanced users may want to change the configuration of their Wireless Modem Router. This chapter explains how to access the configuration webpages, show you the struture of these webpages and it describes them.

4.1 Log on the webpages

1Open your Internet Browser

2Enter http://192.168.2.1 in the address field

3Click on GO

• The following webpage will be displayed

Note

The only default language is English.

4To access the required webpage, click on the corresponding tab on the left side of the page

4.2 Webpages’ menu structure

The table below describes the menu tree of the webpages.

SET UP WIZARD	Getting started
	Wireless settings
	ADSL settings
	Confirm
	Connection status

Note

It is highly recommended to use the Easy Install program available on the provided CD ROM instead of the SET UP WIZARD pages.

ADSL / Internet Settings	ADSL status
	ISP settings
	Parameters
	DNS
Security	Firewall

Access Control

MAC Filter

URL blocking

Schedule Rule

Intrusion Detection

DMZ

Wireless Security

Wireless Encryption

Access control

	WEP
	WPA/WPA2
	802.1X
	Wi-Fi Protected Setup
	PIN
	PBC
	Manual
Home Network Settings	Status
	Network settings
	Wireless
	Channel and SSID
Advanced settings	NAT
	Address Mapping
	Virtual Server
	Special Applications
	NAT Mapping Table
	Maintenance
	Configuration Tools
	Firmware Upgrade
	Reset
	System
	Time Settings
	Password Settings
	Remote Management
	SNMP Community
	Community
	Trap
	UPNP
	QoS
	Traffic mapping
	Traffic statistics
	DDNS
	Routing
	Static route
	RIP
	Routing table

4.3ADSL / Internet Settings webpages

4.3.1 ADSL status

Click on "ADSL Status" which is located on the left side of the screen. The left-hand side displays the main menu and the right-hand side shows descriptive information.

8 Configuring the Wireless ADSL Modem Router