Procom CGA7740N manual Routing, Static route SET UP WiZARD Getting started, RIP parameters

Page 20

Address of your server, such as a web server, and then click on the port Routing table option HTTP Port 80 so users can access your web server from the

Internet connection.

This DNS feature is powered by a DDNS service provider. With a DDNS connection you can host your own web site, email server, FTP site, and more at your own location even if you have a dynamic IP address. (Default : Disable)

4.10 Routing

These pages define routing related parameters, including static routes and RIP (Routing Information Protocol) parameters.

Static route

4.11 SET UP WiZARD

Getting started

1- Click "Add" to add a new static route to the list

2- Click "SAVE SETTINGS" to save the configuration

RIP parameters

RIP sends routing-update messages at regular intervals and when the network topology changes. When a router receives a routing update that includes changes to an entry, it updates its routing table to reflect the new route. RIP routers maintain only the best route to a destination.

After updating its routing table, the router immediately begins transmitting routing updates to inform other network routers of the change.

Make sure that you have a working ADSL subscription and that the ADSL Wireless Base Station is connected to the ADSL phone line. You can verify that the cable is connected correctly by looking at the ADSL light on the top of the ADSL Wireless Base Station. The ADSL light should be on solid after approximately 1 minute.

Wireless settings

In step 2 you can change the Wireless settings of the ADSL Wireless Base Station. For easy installation it is advised to keep the default settings. If you later would like to change any of the wireless settings you can do so via the menu in the ADSL Wireless Base Station.

18

Configuring the Wireless ADSL Modem Router

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Register your product and get support at CGA7740N Page Table of contents Safety information Network range & speed informationConformity Use one of the following disposal optionsWhat else will you need Your Wireless Adsl Modem RouterWhat’s in the box Reset button Power InletButton Adsl portInstall Getting startedConnect TipInstall a WiFi device Install a Wireless USB adapter CCU7740NInstall another WiFi device Install another WPS deviceVia the Manual configuration Via the PBC methodConfiguring the Wireless Modem Router Security webpages Firewall ISP settings 4 DNSParameters Schedule Rule Access Control URL BlockingMAC filter Wireless Security Intrusion DetectionWireless Encryption Access Control802.1x 3 WPSHome Network Settings webpages Status Network settingsWireless ManualAdvanced settings webpages Channel and Ssid1 NAT Virtual ServerFirmware Upgrade Reset Maintenance Configuration ToolsSpecial Applications NAT Mapping TableRemote Management System Time Settings Password SettingsSnmp Snmp communityUpnp Upnp Universal Plug and Play settings Ddns Ddns Dynamic DNS settingsSnmp Trap Traffic Mapping QoSStatic route SET UP WiZARD Getting started Wireless settingsRouting RIP parametersAdsl settings ConfirmTechnical data Adsl FeaturesFrequently asked questions Page
Top Page Image Contents