Procom CGA7740N manual Snmp Trap Traffic Mapping, Upnp Upnp Universal Plug and Play settings, QoS

Page 19

SNMP Trap

Traffic Mapping

Specify the IP address of the NMS to notify when a significant event is detected by the agent. When a trap condition occurs, the SNMP agent sends an SNMP trap message to any NMS specified as a trap receiver.

4.7 UPNP

UPNP (Universal Plug and Play) settings

With Universal Plug and Play, a device can automatically join a network, obtain an IP address, communicate its capabilities, and learn about the presence and capabilities of other devices. Devices can then directly communicate with each other. This further enables peer-to-peer networking.

4.8 QoS

The QoS Settings page allows the user to configure the bandwidth allocation for each forwarding behavior. The QoS settings are described below :

"Name" - Displays the name of the forwarding method, i.e., ’Best Effort’, ’Assured Forwarding’ or ’Expedited Forwarding’.

"Description" - Briefly describes the forwarding method employed. "Priority" - ’Best Effort’ will have lowest priority as it is a basic connectivity service with no guarantees. ’Expeditd Forwarding’ will have highest priority. It provides low delay, low jitter and low loss delivery of packets.

"Bandwidth Allocation" - You choose the minimum bandwidth for each forwarding method.

Traffic Mapping allows you to describe up to 16 rules to classify traffic into forwarding groups. You must specify the traffic type, the forwarding method and the outgoing virtual connection (VC) that this traffic will be routed to.

Traffic Statistics

The Traffic Statistic screen displays the outbound traffic statistics for all forwarding methods over a 12 hour period.

4.9 DDNS

DDNS (Dynamic DNS) settings

DDNS text "Domain Name" is a series of alphanumeric strings separated by periods that maps to the address of a network connection and identifies the owner of the address.

Dynamic DNS provides users on the Internet with a method to tie their domain name to a computer or server. DDNS allows your domain name to follow your IP address automatically by having your DNS records changed when your IP address changes.

The Server Configuration section automatically opens the TCP port options checked in the Virtual Server section. Simply enter in the IP

Configuring the Wireless ADSL Modem Router

17

Image 19
Contents Register your product and get support at CGA7740N Page Table of contents Use one of the following disposal options Safety informationNetwork range & speed information ConformityWhat’s in the box Your Wireless Adsl Modem RouterWhat else will you need Adsl port Reset buttonPower Inlet ButtonTip InstallGetting started ConnectInstall another WPS device Install a WiFi deviceInstall a Wireless USB adapter CCU7740N Install another WiFi deviceVia the PBC method Via the Manual configurationConfiguring the Wireless Modem Router Parameters ISP settings 4 DNSSecurity webpages Firewall MAC filter Access Control URL BlockingSchedule Rule Intrusion Detection Wireless Security3 WPS Wireless EncryptionAccess Control 802.1xManual Home Network Settings webpages StatusNetwork settings WirelessVirtual Server Advanced settings webpagesChannel and Ssid 1 NATNAT Mapping Table Firmware Upgrade Reset MaintenanceConfiguration Tools Special ApplicationsSnmp community Remote Management System Time SettingsPassword Settings SnmpQoS Upnp Upnp Universal Plug and Play settingsDdns Ddns Dynamic DNS settings Snmp Trap Traffic MappingRIP parameters Static route SET UP WiZARD Getting startedWireless settings RoutingConfirm Adsl settingsAdsl Features Technical dataFrequently asked questions Page