Quick Start Guide | ||
|
|
|
Connecting the | Connecting the Line |
|
Interfaces |
|
|
➤To connect the line:
1.Connect the transmit pair to the terminals marked XMT.
2.Connect the receive pair to the terminals marked RCV.
3.Connect the ground wire to the terminal designated GND (optional).
Connecting the DTE
➤To connect the DTE:
• Connect the DTE to the DTE connector on the rear panel of
Connecting the
Power
➤To connect the power:
1.Connect the power cable to the connector on the
2.Connect the power cable to the mains outlet.
| The unit will be turned on automatically upon connection to the |
| mains. |
|
|
|
|
| QS.2 Operating |
Verifying | When data is being transferred, observe that the following front panel LEDs |
Performance | light or blink: |
| • PWR – On |
•
•
•
•
•
TD – Blinks or On
RD – Blinks or On
RTS – On
DCD – On
TEST – Off.
Operating | 3 |