Telular SX4e TDMA technical manual Plug in Your Telephone, Connect the SX4e to a telephone

Page 6

Plug in Your Telephone

1)Locate the modular line port on your phone and plug in one end of a standard phone cord.

2)Connect the other end of the cord to the telephone port on the side of your SX4e - see Figure 7. NOTE: An RJ-11 connector will fit into the phone port.

NOTE: The SX4e does not support direct computer modem (data) operation through the phone port or fax port. See the Digital Data Service section of this manual for computer digital data operation.

3)To add more telephones, plug in a line splitter (not supplied) to the phone port - see Figure 8. NOTE: The SX4e will only let you make one phone call at a time.

		Line		Phone Port
To Phone(s)		Line
To Phone(s)		Splitter
Phone Cord				Phone
	To Phone Port			Phone
	To Phone Port			Cords
				Cords
Figure 7- Connect the SX4e to a telephone.		Figure 8 – An optional Line Splitter lets
		you connect additional phones to your

Phonecell SX4e.

SX4e TDMA 800 • SX4e Tri-Mode

6

Technical Manual

Image 6

Contents Digital TRI-MODETDMA/PCS/AMPS Contents Safe Operation InstructionsImportant Notices Table of Contents Installation Antenna Location and SetupOptional Wall-Mount Installation Connect Your SX4e to AC Power AC PowerPlug in Your Telephone Connect the SX4e to a telephoneHOW to SET UP Your Phone Number Band Order DigitsPhonecell SX4e Operation Supplementary Services Network Dependent Fax and Data Applications FAX and Data TransmissionCaller ID Facsimile MachinesSending Data Refresh FWT to Digital ModeOriginating Fax and Data Calls Receiving Fax and Data CallsHow to Enter the User Setup Mode Phonecell SX4e User SetupUser Setup Commands Auto Send DelayAudio Output Level Control Caller ID Format SelectionPhonecell SX4e Technician Programming Commands Post Receiver Off-Hook Option Roam OptionBand Order System Selection System Operator CodeCasplsduration * casplslevel # Call-Answered Supervision Pulse OptionPress Line-Reversal Outgoing OptionPeriodic Self Test Option Restore Factory Defaults RequestRing Back request Disconnect Pulse OptionSecondary Control Channel Option Primary B-Side Non-Standard Control Channel OptionSecondary A-Side Non-Standard Control Channel Option Secondary Paging Channel OptionPhonecell SX4e Troubleshooting General Information and Safety Blasting Areas AircraftChildren Potentially Explosive AtmospheresImportant Notices Warranty What this Warranty Covers and for HOW LongGeneral Provisions 06/11/02 Part Number