GBC 4064WF-1 operation manual LCD Detailed Reference Sheet

GBC 4064WF-1

LCD DETAILED REFERENCE SHEET

FIGURE 1:

•Top Temp is set for 230*F

•Bottom Temp is set for 230*F

•Position of Rollers or Job is ½ inch.

•Distance the machine ran is 00000ft.

•WAIT indicates that the heat has not reached the set point. (To see the current actual temp, press and hold the Master Dial.)

•REAR indicates that the unit is set to run in reverse mode.

FIGURE 2

FIGURE 2:

•Top Temp is set for 230*F

•Bottom Temp is set for 230*F

•Position of Rollers or Job is ½ inch.

•E-SWITCH PRESSED! Indicates that there is an Emergency Stop pressed. The machine will not run until the E-Stop is released.

•WAIT indicates that the heat has not reached the set point. (To see the current actual temp, press and hold the Master Dial.)

•REAR indicates that the unit is set to run in reverse mode.

Operation Manual

FIGURE 3

FIGURE 3:

•Top Temp is set for 230*F

•Bottom Temp is set for 230*F

•Position of Rollers or Job is ½ inch.

•SEARCHING indicates that the shim dials are searching for the correct location..

•WAIT indicates that the heat has not reached the set point. (To see the current actual temp, press and hold the Master Dial.)

•REAR indicates that the unit is set to run in reverse mode.