FA 400.2
1. Proper use, warranty
The shredder is exclusively designed for destroying paper and cardboard, as well as store cards, credit cards,
Our general business conditions are applicable. We pro- vide a one year warranty for the document shredder. The warranty period is 6 months when used in multiple shifts. This warranty excludes wear, damage due to improper handling, natural depreciation, and actions taken by third parties.
2. Safety instructions
Caution:
It is prohibited to operate one only machine of a
•Read the operating manual before starting up the shredder.
•Do not remove or modify safety devices which guar- antee the safe operation of the machine.
•Observe all safety instructions attached to the ma- chine.
•The shredder may not be operated by anyone under 16 years of age.
•Only open the front door once the machine has come to a standstill.
•Carry out inspection and maintenance regularly.
•Switch off the shredder, disconnect the power plug and call customer service in the following circum- stances:
-Power cables or plugs are damaged
-Liquid has entered the shredder
-The shredder has been exposed to rain
-The machine does not work properly despite the operating manual having been observed
-The shredder has been damaged
Danger of injury
Do not reach into the paper feed opening.
Splinters can cause injury Before destroying credit cards and store cards,
Danger of injury during intake
Do not go near the paper feed open- ing with long hair, loose clothing, ties, scarves, necklaces, bracelets etc.
Do not destroy any material which might become tangled, such as tapes, binder ties or foil.
Switch off the shredder and pull out the power plug
before moving or cleaning the shred- der, or any other task outside its normal scope of use.
Maintenance and service tasks may only be performed by HSM customer service and service engineers of our dealers.
Operating controls for your safety
Emergency stop button
In the event of danger, press the emergency stop button immediately. This switches off the shredder, and stops the cutting block and feed belt.
Main switch (only Solo-version)
In the event of danger, turn the main switch to “0”.
You can secure the main switch in this position with a padlock to prevent restarting.
0702 | 3 |