Sony PCS-G70 manual Dsb Faq, Can the camera be inverted?

PCS-G50 and PCS-G70 Video Communication Systems

Q.Can the camera be inverted?

A.No. PCSA-CG70 and PCSA-CTG70 cannot be inverted; however, EVI-D70 and BRC-300 can be mounted inverted.

Q.How do I change the target of the camera control (Far/Near)?

A.Press and hold the FAR/NEAR button on the remote commander, and PCS-G50/G70 changes the target of the camera control (Far/ Near).

DSB FAQ

Q.How long is the PCSA-DSB1S (XGA + Video Dual Stream) cable?

A.A maximum length of 10m (32.8ft). You can use a long RGB cable so that the DSB box can be placed in the cabinet or rack together with the communication terminal. You can still start/stop presentations and switch input-A/input-B from the remote commander.

Q.Can I start a DSB presentation from the remote commander?

A.Yes, you can start and stop a DSB presentation from the remote commander (press Enter during the call). In addition, you can switch input-A and input-B from the remote commander (press Input Select).

Q.What is the maximum frame rate of the XGA data via PCSA-DSB1S?

A.5 fps if the far end site uses a PCSA-DSB1S as RGB output, and 1 fps if not. The actual frame rate depends on the connection bandwidth and complexity of the XGA data.

Q.Can PCS-G50/G70 display video and data together on a single monitor?

A.No. PCS-G50/G70 can display video on the main monitor and data on a sub monitor or projector. If you have a single monitor, you can switch video and data by pressing the Display button on the remote commander. You cannot view video in the PinP screen while viewing data on a single screen.

8 FAQ