PCS-G50 and PCS-G70 Video Communication Systems
Q.Does the PCS-G50/G70 support H.239 dual stream standard?
A.Yes, both PCS-G50 and PCS-G70 support H.239 standard and can send dual stream data (video and XGA presentation) together during the conference. In addition, PCS-G70 supports dual video (main video and sub video) between PCS-G70 systems.
MCU FAQ
Q.How many sites can be connected with the built-in multipoint function?
A.You can connect up to five remote sites (total of six sites) including IP, ISDN, and ISDN telephone. By connecting two IP multipoint terminals as a cascade, you can connect up to ten sites in one multipoint conference.
Q.Does PCS-G50/G70 support Continuous Presence mode in multipoint conferences?
A.Yes, PCS-G50/G70 displays the split screen (four-site or six-site) as Continuous Presence mode, depending on the number of participating sites.
Q.How does PCS-G50/G70 use bandwidth in a multipoint conference?
A.Bandwidth is divided for each participating terminal: Maximum three sites at 1920 Kbps, two sites at 1280 Kbps. PCS-G50/G70 also supports Speed Matching between IP and ISDN. (For example: IP at 1 Mbps with ISDN at 384 Kbps)
Q.How many screen layouts does PCS-G50/G70 support in a multipoint conference?
A.PCS-G50/G70 supports the following screen layouts:
1.Voice Activated (Full Screen)
2.Continuous Presence 4-site (Split Screen)
3.Continuous Presence with Voice Activated six-site (Split Screen)
4.Broadcast mode from any site in the multipoint or force broadcast (Full Screen)
5.Force Broadcast with Continuous Presence in six-site mode (Split Screen)
NOTE: PCS-G50/G70 supports only Full Screen mode in a cascaded multipoint conference.