5.3.Connecting the remote control To connect the remote switch (Fig.2):
-unscrew the cap of the remote connector (4, Fig.1) and store it in a safe place,
-plug in the remote connector contact (3, Fig.2) observing the key visible on the cable side,
-tighten the union nut,
-attach the remote switch to the weapon pivot or grip with velcro tape (2, Fig.2).
5.4.Adjusting LAM on a weapon
Prior to adjusting LAM which has never been in operation, perform 10 shots in order to stabilize LAM adjustment mechanisms under the influence of shock.
LAM adjustment should be performed after checking the weapon fire capability (with an iron sight) or bringing it to normal fire under the same conditions in the following order:
-zeroing in distance is selected in accordance with fire instructions for a given type of weapon;
-mount LAM on the weapon;
-fix the weapon in the aiming rest and aim it with the help of an iron sight, that is set out in the same way as when checking the weapon fire capability, and at the same point;
11