Newcon Optik LAM 10M IR operation manual Important Information, Read prior to activation

Page 3

IMPORTANT INFORMATION

Read prior to activation

You have just purchased a sophisticated electronic device. To operate it properly, please read this manual carefully. LAM belongs to Class I laser products in accordance with IEC 60825-1. Here are some common precautions that must be observed.

•ALWAYS turn the device off when it is not in use and when you change the battery!

•NEVER look into the beam

•NEVER subject LAM to excessive impacts

•NEVER transport LAM without the case

•NEVER disassemble LAM

•NEVER reverse polarity of the battery

•ALWAYS make sure that the device is fixed firmly on the weapon

•ALWAYS remove battery when not in use for a long period

•ALWAYS store in a warm dry place when not in use

•ALWAYS clean output windows with soft cloth only

•ALWAYS check the O-ring when replacing the battery.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents LAM 10M IR Laser Aiming Module Target Pointer Page Read prior to activation Important InformationContents Brief description Device design LAM 10M IR OFF ModePage Remote switch Standard delivery set Delivery SETSpecifications Installing the battery Operation InstructionsMounting LAM on a weapon Adjusting LAM on a weapon Connecting the remote control To connect the remote switchPage General Maintenance, storage and transportationTo remove old layer of lubricant StorageTransportation To apply new layer of lubricantPage Spot shape or size has changed TroubleshootingWhat This Warranty Does Not Cover WarrantyCustomer Support Quality Certificate Newcon Optik
Top Page Image Contents