For the customers in the U.S.A | Sony PMW-EX3 specification

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

WARNING

When installing the unit, incorporate a readily accessible disconnect device in the fixed wiring, or connect the power plug to an easily accessible socket-outlet near the unit. If a fault should occur during operation of the unit, operate the disconnect device to switch the power supply off, or disconnect the power plug.

Do not install the appliance in a confined space, such as book case or built-in cabinet.

IMPORTANT

The nameplate is located on the bottom.

WARNING

Excessive sound pressure from earphones and headphones can cause hearing loss. In order to use this product safely, avoid prolonged listening at excessive sound pressure levels.

Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

For the customers in the U.S.A.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

You are cautioned that any changes or modifications not expressly approved in this

manual could void your authority to operate this equipment.

All interface cables used to connect peripherals must be shielded in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

For the customers in Canada

This Class A digital apparatus complies with Canadian ICES-003.

For the customers in Europe

This product with the CE marking complies with both the EMC Directive and the Low Voltage Directive issued by the Commission of the European Community.

Compliance with these directives implies conformity to the following European standards:

•EN60065 : Product Safety (AC adaptor)

•EN55103-1 : Electromagnetic Interference (Emission)

•EN55103-2 : Electromagnetic Susceptibility (Immunity)

This product is intended for use in the following Electromagnetic Environments:

E1 (residential), E2 (commercial and light industrial), E3 (urban outdoors), E4 (controlled EMC environment, ex. TV studio)

The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan.

The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

For the State of California, USA only

Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/ hazardouswaste/perchlorate

PMW-EX3 specifications

The Sony PMW-EX3 is a professional camcorder that has established itself as a favorite among filmmakers, broadcasters, and content creators. Launched as part of Sony's XDCAM EX series, the PMW-EX3 is renowned for its versatility, robust features, and high-quality output.

One of the PMW-EX3's standout features is its ability to record in high-definition using the MPEG-2 compression codec, allowing for 1080p, 1080i, and 720p recording options. This flexibility makes it suitable for a wide range of applications, from documentary filmmaking to commercial shoots. The camcorder supports various frame rates, including 24p, 30p, and 60p, enabling users to achieve a cinematic look or high-speed motion recording depending on project requirements.

The EX3 utilizes a 1/2-inch Exmor CMOS sensor that excels in low-light conditions, delivering stunning image quality with rich detail and dynamic range. This sensor contributes to the camera's ability to produce vivid colors and natural skin tones, which is essential for professionals seeking to create visually compelling content.

Another notable feature is the interchangeable lens system. The PMW-EX3 comes equipped with a 14x Fujinon zoom lens, but users have the option to use a variety of lenses thanks to its compatibility with Sony's PL-mount. This adaptability allows for creative freedom when it comes to framing shots and achieving various visual styles.

The camcorder's extensive connectivity options enhance its functionality. It includes HDMI, SDI, and composite outputs, giving users the flexibility to connect to external monitors, recorders, or switchers during live productions. The EX3 also features two SxS memory card slots for simultaneous recording and relay recording, ensuring that users have a reliable workflow without interruptions.

For audio capture, the PMW-EX3 is equipped with two XLR inputs that support professional-grade microphones. This feature is crucial for filmmakers and broadcasters who require high-quality sound to complement their visuals.

The ergonomic design of the PMW-EX3, coupled with its lightweight build, makes it easy to handle for extended shooting periods. The user-friendly controls and customizable settings allow operators to quickly adapt to changing shooting environments, ensuring they never miss a shot.

In conclusion, the Sony PMW-EX3 combines high-definition recording capabilities, versatile lens options, and professional audio features in a compact and user-friendly package. Its reliability and exceptional image quality make it a valuable tool for anyone serious about video production.