Sony PMW-EX3 manual Retrieving the Lens File, When using a non-exclusive lens

mount section and set the adaptor in place.

2Turn the lens mount lever of the camcorder downward. (Keep the lens mount lever of the lens adaptor in the upper position.)

3 Return the lens stopper switch to the

Preparations	LOCK position.
	2 Attach the lens.

When using a non-exclusive lens

You can use the lens file in which you stored the compensation data for the lens, using the LENS menu.

For the storage method, see “Lens File Operations” on page 148.

When you mount a serial lens

The corresponding file is automatically retrieved.

When you mount a non-serial lens

Retrieve the corresponding lens file, using the LENS menu.

PEAKI	NG
		C
		ONTRAST
MIRROR		BRIGHT
	IMAGE
OFF		DISPLAY/BATTINFO
	ON
		ZEBRA

	ASSIGN 4		SHUTTER
		OFF		WHT
1			ON		BAL

			AM
	RTDISP	HISTOGR			ASSIGN
LENSINFOB
				3
		2
1
ND
FILTER
						O
	2	-			FULL AUT
	1		FRAME
	H2
		+		BAL		BARS/CAM
	GAI	WHITE			B
OFF		AT	W		A
	L				PAST
	M
					T	CANCEL
		SEL/SE
STATUS	MENU

1 Press the MENU button to set the camcorder to Menu mode and select (the LENS menu).

2 Select “Recall” from “File” then the corresponding lens file from the list.

LENS

VCL-614B2X

Sony 1/2-inch Bayonet

Mount lens (optional)

1Align the alignment pin of the lens with the recess of the adaptor and set the lens in place.

2Turn the lens mount lever of the adaptor downward.

To detach the lens, reverse the above procedure.

Retrieving the Lens File

By your storing the data (such as compensation data) specific to the lenses in files, required adjustments and compensation can be performed merely by retrieving the appropriate file when changing lenses.

When using an exclusive lens

The optimum compensation data for the two exclusive lenses are stored in the corresponding lens files at the factory to be automatically retrieved (with LENS menu “Auto Recall: On”).

		Auto FB ADJ		Lens ID		XS8X4AS- XB8
		F i l e	B	Recal l	B	User_F i l e 1
		F lar e	B	St ore	B	User_F i l e 2
	Shad ing		B	F i l e ID	: User_F i l e 3
00:00
				No Of f set		User_F i l e 4
				Auto Recal l : On

3 When the confirmation message is displayed, select “Execute.”

For details on menu operations, see “Basic Menu Operations” on page 114.

38

Adjusting the Lens