Sony AR-B1570 manual PNP/PCI Configuration, Load Default Setting, Load Bios Defaults

Page 35

AR-B1570 User’s Guide

5.5 PNP/PCI CONFIGURATION

ROM PCI/ISA BIOS (2A434AVF)

PNP/PCI CONFIGURATION

AWARD SOFTWARE, INC.

PNP OS Installed

: NO

PCI IRQ Actived By

: Level

Resources Controlled By

: Auto

 

 

 

 

Reset Configuration Rate

: Disabled

 

 

 

 

 

 

 

 

 

 

 

 

Esc:

Quit

↑↓→←:

Select Item

 

 

F1:

Help

PU/PD/+/-:

Modify

 

 

F5:

Old Values

(Shift) F2:

Color

 

 

F6:

Load BIOS Defaults

 

 

 

F7:

Load Setup Defaults

 

PNP/PCI CONFIGURATION

PNP OS Installed

This item is to choose whether or not installing the PNP (Plug & Play) operation system.

Resources Controlled By

The available choices are <Auto>&<Manual>. To choose <Auto>the resources will be under the control of system automatically. If <Manual> is chosen, the following items will be listed.

<IRQ (3,4,5,7,9,10,11,12,14,15)> Setting these items one by one will clear up the conflict between NON-PNP ISA extension cards and PNP system.

<DMA (0,1,3,5,6,7)> these items are used for the PNP ISA (PCI) cards or NON-PNP old ISA cards which use DMA channel to enable them work normally.

Reset Configuration Data

This item is used to <enable> the function of Reset Configuration Data or not.

PCI IRQ Actived By

This item is to determine the active mode.

5.6 LOAD DEFAULT SETTING

This section permits the user to select a group of settings for all BIOS Setup options. Not only can you use these items to quickly set system configuration parameters, you can choose a group of settings that have a better chance of working when the system is having configuration related problems.

5.6.1 Load BIOS Defaults

User can load the optimal default settings for the BIOS. that should optimize system performance. If CMOS automatically.

Load high performance settings (Y/N)?

The <LOAD BIOS DEFAULTS> uses best-case values RAM is corrupted, the optimal settings are loaded

5.6.2 Load Setup Defaults

User can load the <LOAD SETUP DEFAULTS> Setup option settings by selecting the Fail-Safe item from the Default section of the BIOS Setup main menu.

The Fail-Safe settings provide far from optimal system performance, but are the most stable settings. Use this option as a diagnostic aid if the system is behaving erratically.

Load failsafe settings (Y/N)?

34

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Industrial Grade CPU Board AR-B1570 User’s Guide Save & Exit Setup Exit Without Saving Preface Organization Static Electricity PrecautionsCPU NS Geode GX1 BGA 1SPECIFICATIONOverview Packing ListCPU NS Geode GX1 FeaturesAward Bios DMA Controller System ControllerMicroprocessor Interrupt Controller Keyboard ControllerInterrupt Controller Port Address Map 1 I/O Port Address MapHex Range Device SSDReal-Time Clock & Non-Volatile RAM TimerReal-Time Clock and Non-Volatile RAM Address DescriptionSerial Port Divisor Latch LS, MS Modem Control Register MCRLine Status Register LSR Modem Status Register MSRData Swapper Parallel PortRegister Address Printer Interface LogicBit’s Definition Printer Control Latch & Printer Control SwapperExternal System Location Setting UP the SystemSystem Setting OverviewPin Signal Hard Disk IDE ConnectorPin Hard Disk IDE Connector CN8 Pin Hard Disk IDE Connector CN7FDD Pin Assignment FDD Port Connector CN3Hard Disk IDE1 Connector PS-ON Header CN9 Ethernet RJ-45 Connector LAN14 PS/2 KB/Mouse Connector CN4 & PS1 Reset Header J7P4 CRT Connector Power Connector PWR2CRT Connector P4 LCD Panel Display Connector LCD1Pin Description USB ConnectorUSB1LED Header J8 LCD Display Pin AssignmentPin PC/104 Connector Bus C & D PC104 13 PC104 ConnectorPin PC/104 Connector Bus a & B PC104 15 IR. Header J1 Parallel Port Connector CN216 Ext. Battery CN1 Battery Jumper JP2RS-485 Terminator Select J2 RS-232 Connector Pin Assignment18 COM1, COM2 CN5, CN6 RS-232/RS-485 Select for COM1 P2 & P320 D.O.C. Memory Address Select JP1 Touch Screen Connector J3 & J4ATX Power External Bottom Connector J6 Utility Diskette InstallationDriver Installation Disk Watchdog TimerWatchdog Block Diagram IRQ Watchdog Timer SettingWatchdog Timer Trigger Bios Setup Main Menu Bios ConsoleBios Setup Overview Floppy Setup Standard Cmos SetupDate & Time Setup Hard Disk SetupMono Halt OnEGA/VGA Bios Features Setup Memory Parity Check Typematic Rate SettingTypematic Delay Msec Video Bios ShadowSdram CAS latency Time Chipset Features SetupBit I/O Cycle Recovery Time Chipset Features SetupLoad Setup Defaults PNP/PCI ConfigurationLoad Default Setting Load Bios DefaultsIntegrated Peripherals IDE HDD Auto Detection Password SettingBios Exit
Top Page Image Contents