2-5. H BOARD REMOVAL
Picture tube
Bezel assembly
Cussion
1Screw
(+BVTP 4 x 16)
2H bracket
3Claw
4H board
5Menu button
•REMOVAL OF ANODE-CAP
NOTE: Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon painted on the CRT, after removing the anode.
•REMOVING PROCEDURES
c
b
a
Anode Button
1 Turn up one side of the rubber cap in | 2 Using a thumb pull up the rubber cap |
the direction indicated by the arrow A. | firmly in the direction indicated by the |
| arrow B. |
•HOW TO HANDLE AN ANODE-CAP
1Don’t scratch the surface of
2Don’t press the rubber hardly not to damage inside of anode- caps!
A material fitting called as
3Don’t turn the foot of rubber over hardly!
The
3When one side of the rubber cap is separated from the anode button, the