Emotiva USP-1 Low Pass Filter Frequency Control, Balanced Subwoofer Output, RCA Subwoofer Output

AUDIO OUTPUT SECTION

6. Low Pass Filter Frequency Control

Rotary knob for selecting the low pass frequency, which can be set from 50Hz to 250Hz, with a slope fixed at 12dB/Octave.

7. Balanced Subwoofer Output

Balanced (XLR) subwoofer connection, with low pass frequency controlled by the rotary knob directly above it (6.).

8. RCA Subwoofer Output

Standard RCA subwoofer connection, with low pass frequency controlled by the rotary knob directly above it (6.).

9. High Pass Filter Frequency Control

Rotary knob for selecting the high pass frequency, which can be set from 50Hz to 250Hz, with a slope fixed at 12dB/Octave.

10. High Pass RCA Outputs

Standard RCA connections for left and right speakers when being used with the High Pass filter.

11. Full Range Outputs

These RCA outputs are 5Hz 5Hz - 80kHz, with less than 0.05dB of deviation. These outputs are unaffected by the High Pass or Low Pass filters.

12. Main Power Switch

This rocker switch provides the master power for the USP-1. After it is in the ON position, the USP-1 can be turned on manually from the front panel switch, remote control, or automatically with the trigger input via a 3.5mm input jack.

13. Power Receptacle

Uses standard IEC power cord.

12