Sony MP595 manual Configuring the Wireless Access Point, Overview

Page 51

6: Configuring the Wireless Access Point

• Unlock MP modem

 

configuration

This chapter describes how to use the MP 595 modem as a

• Enable the wireless

wireless access point. You can use the MP 595 as a wireless

access point

access point in either NAT or non‐NAT modes1.

• Set the SSID

 

• Configure the security

Note: This chapter only applies to the MP 595W.

settings

 

 

• Reset the MP modem

 

to factory defaults

Overview

 

By default the wireless access point is disabled. The main steps

 

for configuring the MP modem wireless access point are:

 

• Enable wireless access point.

Optional:

•Change the password.

•Set the SSID.

•Set the security settings.

•Enable NAT, if applicable. (See Chapter 5 for details.)

Note: Watcher is currently not available over a WAP network. You can use Watcher over any Physical Interface to enable the WAP interface.

Note: If the Wi-FI is enabled and is in Non-NAT mode, the computer that is connected to the Wi-Fi can monitor cellular connection by using ethernet through the watcher.

1.See Chapter 5 for information on enabling and configuring NAT mode.

 

 

 

 

 

 

 

Rev 1.5 Jul.08

 

 

 

 

 

45

 

 

 

Page 50 Page 52
Image 51
Page 50 Page 52
Contents User Guide for Verizon Page Important Notice Safety and Hazards Limitation Liability Qualcomm 3G Patents CopyrightTrademarks Contact Information Support@sierrawireless.comRevision History Directing users to the MP 3G Modems AT Command ReferenceContents MP Modem Operation Configuring the Router Functions Support and Warranty Regulatory Information AirLink MP595 / MP595W Modem User Guide 2130795 Introducing the MP Modem Cdma account and coverage About CdmaReceive diversity Connection methodsSupported Cdma radio frequencies VPN support for Rnap Virtual serial portSoftware DocumentationMP Modem Manager AirLink MP595 / MP595W Modem User Guide Getting Started Plan your MP modem installation Where do you want to install your MP modem?What type of connections do you plan to use? Getting Started Package contents Required equipmentAdditional required equipment System requirements MP modem accessoriesAirLink MP595 / MP595W Modem User Guide 2130795 Hardware and Software Installation Installation overviewMP modem housing Connector panel Overview of installation stepsGPS and I/O options Mounting the MP modem Install the MP modemMount the MP modem Select a location for the MP modemMounting the MP modem. Arrows indicate the mounting holes Ground the MP modemMain RF antenna Mount the antennas and install the cablesGPS antenna MP 595880W onlyAntenna locations Install the antennas and cables Vehicle installation Install the power harnessPower connector Power connector Molex pinoutsIgnition sense options Ignition sense on/off wiringCrimp terminals Ground the power harnessPower connections Correct wire splicingConnect the MP modem to computer cable Office installationInstall the USB, Ethernet or serial cable Serial connector DB9 pinoutsInstall the software Activate your accountPort connections Automated activation Test the systemActivation Wizard Manual activationTurning the MP modem on and off MP Modem OperationLED operation Status indicatorsReset the MP modem 3G Watcher software3G Watcher Help Launching 3G Watcher Connection to MP Physical InterfaceChanging the Physical Interface 3G Watcher window Establishing connectionsYou now have DUN connection Auto-Connect for DUNNAT mode Configuring the Router FunctionsNAT mode Non-NAT modeMode MP modem networking basics in NATFile and resource sharing over LAN Static IP and TCP/UDP port forwarding in NAT modeEnable the router Set up static IP addressesSet up TCP/UDP port forwarding AirLink MP595 / MP595W Modem User Guide 2130795 Overview Configuring the Wireless Access PointChange the password optional Unlock MP modem configurationSet the Ssid Enable the wireless access pointConfigure the security settings Configure security on the client computers Reset the MP modem to factory defaultsAirLink MP595 / MP595W Modem User Guide 2130795 GPS configuration and reporting Configuring the MP Modem to Report GPS and I/O DataGPS display in 3G Watcher GPS protocols and commandsGPS Taip quick reference Device installation and configurationConnector pinouts Port specificationsDigital input devices Example panic button connections A button wired to Pin 4 digital input and Pin 10 GroundAnalog input devices Digital output devicesExample analog sensor connections Configuration using AT or 3G Watcher commandsExample Analog input setupDigital I/O setup AirLink MP595 / MP595W Modem User Guide 2130795 Route data to a server Configure the MP modem toReport frequency timers Sending Data to Your Network ApplicationTmsumregind Sending Data to Your Network Application IP Addressing Monitoring and Tracking configurationProblem created by Network Address Translation Retrieve the Unique Mobile Device ID Solutions to the NAT problemSupport and Warranty WarrantyTechnical support AirLink MP595 / MP595W Modem User Guide 2130795 Regulatory, radio frequency and electrical specifications Technical SpecificationsWeight and dimensions Environmental specificationsGPS specifications Host interfacesOther interfaces Wireless access point specifications Port characteristicsWPA2 AirLink MP595 / MP595W Modem User Guide 2130795 Canada Regulatory InformationImportant Note FCC CautionApproved antennas Numerics IndexRev 1.5 Jul.08 Index Wireless Access Point. See WAP Document SubTitle 2130795

MP595 specifications

The Sony MP595 is a sophisticated multimedia projector that offers advanced features ideal for both professional and personal use. Renowned for its superb image quality and versatile functionality, the MP595 is designed to deliver exceptional visual experiences in a variety of settings.

One of the standout characteristics of the MP595 is its high resolution. It typically supports resolutions up to 1920x1080, allowing for sharp and detailed images that enhance presentations and media consumption. This capability is particularly advantageous for businesses and educational institutions that require clarity for their visual content, from presentations to detailed graphs and charts.

The projector employs advanced DLP (Digital Light Processing) technology, which contributes to its vibrant color reproduction and excellent contrast ratios. This technology minimizes the presence of rainbow artifacts, providing a more seamless viewing experience. The result is bright, rich colors that captivate audiences, making it a perfect choice for movie nights, corporate presentations, or classroom settings.

Another notable feature is the MP595's portability. Weighing modestly, it features a compact design that makes it easy to transport to various locations. Whether it’s moving from a conference room to a training seminar, the lightweight nature of the projector simplifies setup and takedown, ensuring that users can focus more on their presentations rather than logistics.

Connectivity options are plentiful with the MP595, allowing users to easily connect to various devices. It usually includes HDMI, VGA, and USB ports, accommodating laptops, tablets, and other media players. Wireless connectivity capabilities further expand its versatility, enabling presentations directly from smartphones or tablets without the need for cables.

In terms of sound, the Sony MP595 integrates a robust built-in audio system that enhances the overall experience. This eliminates the need for external speakers in smaller settings, making it an all-in-one solution for presentations and home entertainment.

Additionally, the projector often features adjustable settings for lens shift and keystone correction, which help in achieving optimal image alignment on any surface. These adjustments are crucial for maintaining image integrity when projecting from various angles.

Overall, the Sony MP595 stands out with its high-resolution capabilities, portability, versatile connectivity, and advanced technologies. It is a reliable choice for anyone looking to enhance their visual presentations, whether for business, education, or entertainment purposes. The combination of these features positions the MP595 as a formidable player in the multimedia projector market.
Top Page Image Contents