Sony MP595 manual Connector pinouts, Digital input devices, Port specifications

Page 60

AirLink MP595 / MP595W Modem User Guide

Note: No more than 36 VDC should be applied to any I/O pins.

Before using the digital input/output lines, you must configure them as inputs or outputs.

Connector pinouts

The MP modem’s I/O port is a female DB15HD connector with eight active I/O pins:

Two (2) digital I/O pins.

Two (2) digital input pins.

Four (4) analog input pins.

There are also six reserved pins and one ground pin.

15

610

1115

DB15HD male cable

DB15HD female connector on rear of MP modem

1.Reserved—do not connect

2.Reserved—do not connect

3.Digital Input/Output 1

4.Digital Input 3

5.Reserved—do not connect

6.Reserved—do not connect

7.Analog Input 2

8.Analog Input 4

9.Reserved—do not connect

10.Ground (GND)

11.Digital Input/Output 2

12.Digital Input 4

13.Reserved—do not connect

14.Analog Input 1

15.Analog Input 3

Figure 7-1: Pinouts for a male DB15HD I/O cable (left) that connects to the MP modem’s female DB15HD I/O connector (right). Note that the two figures’ pinouts are mirror images of each other, since they plug into one another.

Port specifications

See “I/O port characteristics” on page 72 for the technical specifications of the I/O ports, including input voltages.

Digital input devices

Digital input devices are those that have only two states and send a signal to the MP modem in one of those states. An example of a digital input device might be a gun rack alarm that sends a signal to the MP modem any time the gun rack is open. Another example would be a panic button that sends a signal to the MP modem when it is pushed.

 

 

 

 

 

 

 

54

 

 

 

 

 

2130795

 

 

 

Image 60
Contents User Guide for Verizon Page Important Notice Safety and Hazards Limitation Liability Patents Copyright Qualcomm 3GSupport@sierrawireless.com Trademarks Contact InformationDirecting users to the MP 3G Modems AT Command Reference Revision HistoryContents MP Modem Operation Configuring the Router Functions Support and Warranty Regulatory Information AirLink MP595 / MP595W Modem User Guide 2130795 Introducing the MP Modem About Cdma Cdma account and coverageReceive diversity Connection methodsSupported Cdma radio frequencies Virtual serial port VPN support for RnapSoftware DocumentationMP Modem Manager AirLink MP595 / MP595W Modem User Guide Getting Started Plan your MP modem installation Where do you want to install your MP modem?What type of connections do you plan to use? Getting Started Package contents Required equipmentAdditional required equipment MP modem accessories System requirementsAirLink MP595 / MP595W Modem User Guide 2130795 Hardware and Software Installation Installation overviewMP modem housing Connector panel Overview of installation stepsGPS and I/O options Install the MP modem Mount the MP modemSelect a location for the MP modem Mounting the MP modemGround the MP modem Mounting the MP modem. Arrows indicate the mounting holesMount the antennas and install the cables Main RF antennaGPS antenna MP 595880W onlyAntenna locations Install the antennas and cables Install the power harness Power connectorPower connector Molex pinouts Vehicle installationIgnition sense on/off wiring Ignition sense optionsGround the power harness Power connectionsCorrect wire splicing Crimp terminalsOffice installation Connect the MP modem to computer cableSerial connector DB9 pinouts Install the USB, Ethernet or serial cableInstall the software Activate your accountPort connections Test the system Activation WizardManual activation Automated activationMP Modem Operation Turning the MP modem on and offStatus indicators LED operationReset the MP modem 3G Watcher software3G Watcher Help Launching 3G Watcher Connection to MP Physical InterfaceChanging the Physical Interface Establishing connections 3G Watcher windowAuto-Connect for DUN You now have DUN connectionConfiguring the Router Functions NAT modeNon-NAT mode NAT modeMP modem networking basics in NAT ModeStatic IP and TCP/UDP port forwarding in NAT mode Enable the routerSet up static IP addresses File and resource sharing over LANSet up TCP/UDP port forwarding AirLink MP595 / MP595W Modem User Guide 2130795 Configuring the Wireless Access Point OverviewUnlock MP modem configuration Change the password optionalEnable the wireless access point Set the SsidConfigure the security settings Reset the MP modem to factory defaults Configure security on the client computersAirLink MP595 / MP595W Modem User Guide 2130795 Configuring the MP Modem to Report GPS and I/O Data GPS configuration and reportingGPS protocols and commands GPS display in 3G WatcherDevice installation and configuration GPS Taip quick referenceConnector pinouts Port specificationsDigital input devices A button wired to Pin 4 digital input and Pin 10 Ground Example panic button connectionsDigital output devices Analog input devicesConfiguration using AT or 3G Watcher commands Example analog sensor connectionsAnalog input setup ExampleDigital I/O setup AirLink MP595 / MP595W Modem User Guide 2130795 Configure the MP modem to Report frequency timersSending Data to Your Network Application Route data to a serverTmsumregind Sending Data to Your Network Application Monitoring and Tracking configuration IP AddressingProblem created by Network Address Translation Solutions to the NAT problem Retrieve the Unique Mobile Device IDSupport and Warranty WarrantyTechnical support AirLink MP595 / MP595W Modem User Guide 2130795 Technical Specifications Regulatory, radio frequency and electrical specificationsEnvironmental specifications Weight and dimensionsGPS specifications Host interfacesOther interfaces Port characteristics Wireless access point specificationsWPA2 AirLink MP595 / MP595W Modem User Guide 2130795 Regulatory Information CanadaImportant Note FCC CautionApproved antennas Index NumericsRev 1.5 Jul.08 Index Wireless Access Point. See WAP Document SubTitle 2130795

MP595 specifications

The Sony MP595 is a sophisticated multimedia projector that offers advanced features ideal for both professional and personal use. Renowned for its superb image quality and versatile functionality, the MP595 is designed to deliver exceptional visual experiences in a variety of settings.

One of the standout characteristics of the MP595 is its high resolution. It typically supports resolutions up to 1920x1080, allowing for sharp and detailed images that enhance presentations and media consumption. This capability is particularly advantageous for businesses and educational institutions that require clarity for their visual content, from presentations to detailed graphs and charts.

The projector employs advanced DLP (Digital Light Processing) technology, which contributes to its vibrant color reproduction and excellent contrast ratios. This technology minimizes the presence of rainbow artifacts, providing a more seamless viewing experience. The result is bright, rich colors that captivate audiences, making it a perfect choice for movie nights, corporate presentations, or classroom settings.

Another notable feature is the MP595's portability. Weighing modestly, it features a compact design that makes it easy to transport to various locations. Whether it’s moving from a conference room to a training seminar, the lightweight nature of the projector simplifies setup and takedown, ensuring that users can focus more on their presentations rather than logistics.

Connectivity options are plentiful with the MP595, allowing users to easily connect to various devices. It usually includes HDMI, VGA, and USB ports, accommodating laptops, tablets, and other media players. Wireless connectivity capabilities further expand its versatility, enabling presentations directly from smartphones or tablets without the need for cables.

In terms of sound, the Sony MP595 integrates a robust built-in audio system that enhances the overall experience. This eliminates the need for external speakers in smaller settings, making it an all-in-one solution for presentations and home entertainment.

Additionally, the projector often features adjustable settings for lens shift and keystone correction, which help in achieving optimal image alignment on any surface. These adjustments are crucial for maintaining image integrity when projecting from various angles.

Overall, the Sony MP595 stands out with its high-resolution capabilities, portability, versatile connectivity, and advanced technologies. It is a reliable choice for anyone looking to enhance their visual presentations, whether for business, education, or entertainment purposes. The combination of these features positions the MP595 as a formidable player in the multimedia projector market.