KP-43T75A/53SV75A
5-5. BAR DISPLAY POSITION ADJUSTMENT (OP-DISP)
1.Receive the NTSC monoscope signal.
2.Set to service mode.
3.Push “ PICTURE +” . (Bar is displayed)
4.Select “
5.Write the data into memory. MUTING n ENTER
X1 X2
X1 = X2
Fig.
5-6. PIP POSITION ADJUSTMENT (PI-PIPH, PIPV, PPH5, PPV5)
1.Set the PIP mode.
2.Receive the NTSC monoscope signal on the main/sub picture.
3.Check the sub picture position.
4.If necessary set to service mode and adjust "PIPH", "PIPV".
5.Write the data into memory. MUTING n ENTER
Y1
Y2
X1 |
| X2 |
|
Fig.
6.Receive the
7.Check the sub picture position as specified above.
8.If necessary set to service mode and adjust "PPH5", "PPV5".
9.Write the data into memory. MUTING n ENTER
5-7. TEXT POSITION ADJUSTMENT (CCD-CCHP)
1.Receive RF signal with text.
2.Check the text position.
X1 = X2
4.If necessary set to service mode and adjust "CCHP".
5.Write the data into memory. MUTING n ENTER
X1 | X2 |
Fig.
– 42 –