KP-43T75A/53SV75A
[GREEN REGISTRATION ADJUSTMENT]
<GREEN CENTER>
1.Select GRN CENT 1and 4 keys on the remote commander.
2.Adjust the center of crosshatch line goes the middle vertically and horizontally (GRN CENT) with the joystick on the remote commander.
|
|
|
|
|
| GRN | 000 | 000 |
|
| CENT |
|
|
|
|
|
|
|
|
|
|
|
|
|
: Middle
<GREEN SKEW>
1.Select GRN SKEW with the 1and 4 keys on the remote commander.
2.Adjust the crosshatch line goes straight vertically and horizon- tally with the joystick on the remote commander.
|
|
|
|
|
|
| GRN | 000 | 000 |
| |
| SKEW |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<GREEN PINCUSHION>
1.Select GRN PIN with the 1and 4 keys on the remote commander.
2.Adjust the crosshatch line goes straight horizontally with the joystick on the remote commander.
GRN | XXXX | 000 |
PIN |
Note : These are required when either severe
<FINE ADJUSTMENT>
1.Press 9 key on the remote commander to shift to the fine adjustment mode.
The green cursor (in the GRN mode) appears on the center of the screen.
2.Use the 1and 4 keys or the joystick on the remote com- mander, move the cursor (see below) everywhere you want to adjust and adjust with the joystic keys on the remote com- mander.
Marker movement by the 1and 4 keys:
Press once the joystick the cursor turns green to white.
Then you can move the cursor up and down left and right every where you want.
Press once the joystick the cursor stops and returns green, you can adjust around the cursor.
3.Press 9 key on the remote commander to shift to the coarse adjustment mode.
– 36 –