Cisco Systems 6200 appendix SLC 8DMT Speciﬁcations

Page 32

1 Hardware Description

78-5296-02 10/02/98

1.5.6 SLC 8DMT Speciﬁcations

Table 1-12 lists the physical and electrical speciﬁcations of the SLC 8DMT.

Table 1-12	SLC 8DMT Speciﬁcations

Speciﬁcation		Description

Subscriber ports		8 per card

Transmission speeds		Downstream: up to 8.032 Mbps
		Upstream: up to 864 kbps

Loop hardware media		Unshielded twisted pair copper wire

Loop modulation method		ADSL with DMT line code

Layer 2 format		ATM (service and subscriber side, end-to-end)

ATM virtual circuits supported		Up to 31 per subscriber, numbered 33 through 63 (VPI 0)

Data channel frequencies		• Upstream: 25.875 to 138 kHz
		• Downstream: 138 kHz to 1.104 MHz

Internal hardware		• Motorola MC68360
		• 1 Mbyte Flash memory
		• 512 kbyte Flash boot memory
		• ADI DMT chip set
		• Cisco ATM framer

Dimensions		1.17 x 15.75 x 9.75 in
(width x height x depth)		(3.0 x 40.0 x 24.8 cm)

Weight		3 lb (1.36 kg)

Power consumption		79.2 W

1-32Cisco 6200 User Guide

Image 32

Contents Hardware Description Cisco DSL Product FamilyCisco 6200 Chassis Module CompartmentBackplane Cisco 6200 Chassis, Front ViewCisco 6200 Chassis, Rear View Primary a and Secondary B H-BusesEthernet Management Bus Alarm Relay Connection Connections to Pots Splitters or Telephone LinesPower Entry Modules PEMs Power TerminalsUnused Connectors Fan TrayCooling Vents Dslam SpeciﬁcationsCisco 6200 Dslam Speciﬁcations Speciﬁcation DescriptionStandards and Certiﬁcations Category DescriptionWhat is the NTC OC-3? Network Trunk Cards NTCsNTC OC-3 Physical Description OC-3c Trunk PortReset Switch LED IndicatorsDescribes the LEDs on the faceplate of the OC-3 NTC NTC OC-3 FaceplatesLEDs on the NTC OC-3 Color Condition IndicatedWhat is the NTC STM-1? NTC OC-3 SpeciﬁcationsLists the physical and electrical speciﬁcations of the NTC NTC OC-3 SpeciﬁcationsNTC STM-1 Application NTC STM-1 Physical Description Trunk PortDescribes the LEDs on the faceplate of the NTC STM-1 NTC STM-1 FaceplatesNTC STM-1 Speciﬁcations LEDs on the NTC STM-1Management Processor Card MPC Functional DescriptionCisco 6200 is controlled and managed by the MPC NTC STM-1 SpeciﬁcationsMPC Faceplate ACO SwitchPhysical Description Console Port Pcmcia Slots and Ejection ButtonsEthernet Port All LEDs on the MPC are described in TableMPC Speciﬁcations MPC SpeciﬁcationsLists the physical and electrical speciﬁcations of the MPC What is the SLC 8CAP? Subscriber Line Card SLCHow the SLC Handles Trafﬁc Transmission Rates and Modem TrainingStatistics 10 SLC 8CAP OperationSLC 8CAP Faceplate SLC 8CAP Physical DescriptionDescribes the LEDs on the faceplate of the SLC SLC 8CAP LEDs SLC 8CAP Speciﬁcations SLC 8CAP SpeciﬁcationsWhat is the SLC 8DMT? How the SLC 8DMT Handles TrafﬁcTwo modes are available for setting transmission rates SLC 8DMT Physical Description 11 describes the LEDs on the faceplate of the SLC SLC 8DMT FaceplateSLC 8DMT LEDs SLC 8DMT Speciﬁcations SLC 8DMT Speciﬁcations