Dell R610 owner manual Entering the System Setup Program, Responding to Error Messages

Entering the System Setup Program

1Turn on or restart your system.

2Press <F2> after you see the following message:

<F2> = System Setup

NOTE: The system will not respond until the USB keyboard is active.

If your operating system begins to load before you press <F2>, allow the system to finish booting, and then restart your system and try again.

Responding to Error Messages

If an error message appears while the system is booting, make a note of the message. See "System Messages" for an explanation of the message and suggestions for correcting errors.

NOTE: After installing a memory upgrade, it is normal for your system to display a message that the system memory size has changed the first time you start your system.

Using the System Setup Program Navigation Keys

Keys	Action
Up arrow or <Shift><Tab>	Moves to the previous field.
Down arrow or <Tab>	Moves to the next field.
Spacebar, <+>, <–>, left and	Cycles through the settings in a field. In many
right arrows	fields, you can also type the appropriate value.
<Esc>	Exits the System Setup program and restarts the
	system if any changes were made.
<F1>	Displays the System Setup program's help file.

NOTE: For most of the options, any changes that you make are recorded but do not take effect until you restart the system.

58

Using the System Setup Program and UEFI Boot Manager