System Features
The major hardware and software features of your system include:
•1U/1S rack-mountable chassis with support for static rails and sliding rails.
NOTE: Use the System Setup program to view processor information. See "Using the System Setup Program" in your Hardware Owner’s Manual.
•One of the following processors:
–Intel® Celeron®
–Intel Pentium® Dual-Core™
–Intel Core 2 Duo™
–Dual-Core Intel Xeon® Processor 3000 Series
–Quad-Core Intel Xeon Processor 3200 Series.
•A minimum of 512 MB of 667-MHz or 800-MHz DDR2 SDRAM memory, upgradable to a maximum of 8 GB by installing combinations of 512-MB, 1-GB, or 2-GB unbuffered ECC memory modules in four memory module sockets on the system board.
•One of the following riser card options:
–One full-height, half-length, x8 lane PCIe expansion slot and one full- height, half-length PCIe expansion slot with a x8 connector but with a x4 lane capability.
–One full-height, half-length, 133MHz/64 bit PCI-X expansion slot and one full-height, half-length, x8 lane PCIe expansion slot, which includes a connector for an optional remote access controller (RAC) card.
•One 3.5-inch CD, DVD, or combination CD-RW/DVD in a peripheral drive bay.
•Support for the following internal hard-drive configurations:
–Up to two internal, 1-inch high, SATA hard drives with the integrated drive controllers.
–Up to two internal, 1-inch high optional Serial-Attached SCSI (SAS) hard drives with an optional SAS controller card.
•Optional remote access controller for remote systems management. This option requires a riser card with support for PCI-X and PCIe RAC connectors.
•Optional USB flash drive emulates a diskette drive or hard drive.
•One 345-W power supply.
