Dell MD3660I manual Optional Set Up In-Band Management

Step 8: (Optional) Set Up In-Band Management

Out-of-band management (see Step 1: Discover the Storage Array (Out-of-band Management Only) ) is the recommended method for managing the storage array. However, to optionally set up in-band management, use the steps shown below.

The default iSCSI host port IPv4 addresses are displayed below for reference:

Controller 0, Port 0: IP: 192.168.130.101 Controller 0, Port 1: IP: 192.168.131.101

Controller 0, Port 0: IP: 192.168.132.101 Controller 0, Port 1: IP: 192.168.133.101

Controller 1, Port 0: IP: 192.168.130.102 Controller 1, Port 1: IP: 192.168.131.102

Controller 1, Port 0: IP: 192.168.132.102 Controller 1, Port 1: IP: 192.168.133.102

NOTE: The management station you are using must be configured for network communication to the same IP subnet as the PowerVault MD3660i host ports.

1.Establish an iSCSI session to the PowerVault MD3660i RAID storage array.

2.Restart the SMagent service.

3.Launch MD Storage Manager.

If this is the first storage array to be set up for management, the Add New Storage Array window is displayed. Otherwise, click New.

4.Select Manual and click OK.

5.Select In-band management and enter the host server name(s) or IP address(es) of the host server that is running the PowerVault MD Storage Manager.

6.Click Add.

In-band management should now be successfully configured.

44