Dell MD3220i, MD3200i manual 2011 Rev. A01

Page 2

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

____________________

Information in this publication is subject to change without notice. © 2011 Dell Inc. All rights reserved.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell™, the DELL logo, and PowerVault™ are trademarks of Dell Inc. Intel® and Pentium® are registered trademarks of Intel Corporation in the U.S. and other countries. Microsoft®, Windows®, and Windows Server® are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Red Hat® and Red Hat® Enterprise Linux® are registered trademarks of Red Hat, Inc. in the United States and other countries. SUSE® is a registered trademark of Novell, Inc., in the United States and other countries. VMware® is a registered trademark of VMware, Inc. in the United States or other countries. Citrix™ is a trademark of Citrix Systems, Inc. and/or more of its subsidiaries, and may be registered in the United States Patent and Trademark Office and in other countries.

Other trademarks and trade names may be used in this publication to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

2011 - 09

Rev. A01

Image 2
Contents Deployment Guide 2011 Rev. A01 Contents Microsoft Windows Host Setup ISCSI Configuration WorksheetDisk Configuration Utility Uninstalling Dell PowerVault MD StorageConfigure Host Access Uninstalling PowerVault MD Storage SoftwareConfigure the iSCSI Ports on Configure Chap Authentication onAppendix-Load Balancing Connect to the Target Storage Array FromManagement Station Requirements IntroductionSystem Requirements Introduction to Storage Arrays Introduction Introduction Hardware Installation Planning the Storage ConfigurationCabling the Storage Array Connecting the Storage ArrayRedundant and Non-Redundant Configurations Direct-Attached Configurations Single Path Data ConfigurationsFour Hosts Connected to a Single Controller Shows two hosts connected to a single controller array Eight Hosts in a Dual-Controller Configuration Dual-Path Data Configuration Four Hosts Connected to Two Controllers Four Hosts Connected in a Dual-Controller Configuration Network-Attached Configurations Servers Connected to a Single Controller Servers Connected to Two Controllers Cabling PowerVault MD1200 Series Expansion Enclosures Hardware Installation Click Tools→ Upgrade RAID Controller Module Firmware Click Advanced→ Maintenance→ Download→ EMM Firmware Installing PowerVault MD Storage Software Graphical Installation Recommended Select Install MD Storage Software Console Installation Silent InstallationUpgrading PowerVault MD Storage Software Installing PowerVault MD Storage Software Before You Begin Post Installation TasksStandard Terminology Used in iSCSI Configuration Definition ISCSI Configuration Worksheet IPv4 Settings Chap SecretIPv6 Settings Mutual Chap Target ChapFE80 0000 0000 Manager Configuring iSCSI on Your Storage ArrayHost Server Vs. Storage Array Storage Array Configuration Host Configuration Host Connectivity Configuration Configure the Storage Array Using PowerVault Mdcu Post Installation Tasks Post Installation Tasks Post Installation Tasks Configure the Host Connectivity Using PowerVault Mdcu Source Port Selection for iSCSI Host Ports Automatic Selection Post Connection Establishment Steps Guidelines for Configuring Your Network for iSCSI Microsoft Windows Host SetupControl Panel, select Network connections Linux Host Setup Edit the /etc/sysconfig/network fileHWADDR=XXXXXXXXXXXX GATEWAY=192.168.1.1 Uninstalling PowerVault MD Storage Software Click Change/RemoveUninstalling PowerVault MD Storage Software From Linux Run the file Uninstall Dell MD StorageAppendix-Manual Configuration of iSCSI Table A-1. Host Server Vs. Storage ArrayDefault Management Port Settings Discover the Storage Array Out-of-band Management OnlyManual Storage Array Discovery Setting Up the ArrayAutomatic Storage Array Discovery Configure the iSCSI Ports on the Storage Array Table A-2. Initial Setup Tasks Dialog Box PurposeAppendix-Manual Configuration of iSCSI Perform Target Discovery From the iSCSI Initiator Set the iSCSI initiator service to start automatically Configure Host Access Target Chap Understanding Chap AuthenticationWhat is CHAP? Mutual ChapTable A-3. Chap Types Defined Description Configure Chap Authentication on the Storage Array OptionalChap Definitions Configuring Target Chap Authentication on the Storage Array Table A-4. Chap Setting Option DescriptionConfigure Chap Authentication on the Host Server Optional Configuring Mutual Chap Authentication on the Storage ArrayIf you are using Windows Server 2008 Core version Add the target portal with Chap defined Discovery.sendtargets.auth.authmethod = Chap Connect to the Target Storage Array From the Host Server Local Adapter-Must be set to Microsoft iSCSI Initiator TCPPortNumberOfTargetPortal is For example, your log on command might look like this Optional Set Up In-Band Management Appendix-Using Internet Storage Naming Service Appendix-Using Internet Storage Naming Service Round Robin With Subset Appendix-Load BalancingLoad Balance Policy Least Path Weight With Subset Least Queue Depth With SubsetIncreasing Bandwidth With Multiple iSCSI Sessions TCP Connections ISCSI SessionsAppendix-Load Balancing Appendix-Load Balancing Appendix-Stopping and Starting iSCSI Services in Linux Appendix-Stopping and Starting iSCSI Services in Linux
Related manuals
Manual 22 pages 36.51 Kb Manual 268 pages 25.67 Kb

MD3200i, MD3220i specifications

The Dell MD3220i and MD3200i are part of Dell's extensive line of modular storage solutions, designed to support organizations in optimizing their data management and scalability requirements. These models offer reliable performance and flexible features, making them suitable for various workloads including virtualization, cloud storage, and disaster recovery.

One of the standout features of the MD3220i and MD3200i is their support for iSCSI storage networking. By utilizing the Internet Small Computer Systems Interface (iSCSI) protocol, these systems provide organizations with a cost-effective way to connect their storage over existing network infrastructure, enabling efficient data transfers and management.

Both models are equipped with dual controllers that ensure high availability and failover capabilities, which are crucial for meeting uptime requirements in mission-critical environments. The dual controllers also facilitate load balancing and increase overall system performance, as they allow multiple paths to the storage, enhancing I/O performance.

Scalability is another key characteristic of the MD3220i and MD3200i. These storage arrays can be expanded to meet growing storage demands, supporting up to 240TB of raw capacity with up to 16 additional expansion enclosures. This flexibility allows organizations to start with a smaller configuration and grow their storage capabilities without a complete overhaul of the existing infrastructure.

The units also support multiple disk types, including traditional spinning disks, solid-state drives (SSDs), and a combination of both. This versatility enables users to tailor storage configurations to their specific performance and budgetary needs. Furthermore, the systems feature advanced data management technologies such as snapshots and remote replication, providing essential tools for data protection.

With their ease of management, the MD3220i and MD3200i are designed for straightforward configuration and operation. The intuitive management interfaces allow IT professionals to monitor performance, configure storage, and manage data effectively, ensuring businesses can maintain optimal system availability.

In summary, the Dell MD3220i and MD3200i are robust, scalable, and versatile storage solutions that cater to diverse organizational needs. Their integrated technologies, such as iSCSI support, dual controller architecture, and advanced data management features, make them an ideal choice for modern data centers looking to enhance storage capabilities while ensuring reliability and performance.