Dell MD3220i, MD3200i manual Host Configuration Host Connectivity Configuration

Page 40

4Configure the IP protocols and addresses for the management ports.

5Configure the IP protocols and addresses for the iSCSI ports.

6Specify the CHAP authentication method.

7Apply the settings after reviewing a summary.

8Repeat the process starting from step 2 to configure additional arrays.

Host Configuration (Host Connectivity Configuration)

After you have completed configuring your iSCSI-based storage arrays, the next task is to run this utility on all hosts that need to access the storage arrays. Depending on your network configuration, your host may be the same machine you use to manage your storage arrays, or it may be on a completely separate network.

The option to configure a host is disabled if the machine the utility is running on does not have an iSCSI initiator or the required driver components installed. When the option is disabled, the utility also displays an informational message. If you are running the utility on a host which is not connected to the iSCSI–based storage array (or which you do not wish to connect to the array), the informational message can be ignored.

The task generally involves the following steps:

1Discover available storage array(s) for connection.

2Select a storage array to connect to.

3Specify the CHAP secret.

4Select the iSCSI ports the host's initiator uses to log on.

5Repeat the process starting from step 2 to connect to additional arrays.

6Repeat these steps on each host that needs access to the storage array(s).

Before Starting the Configuration Process

Before you start configuring the storage array or host connectivity, it is recommended that you fill out the iSCSI configuration worksheet to help you plan your configuration. You may need to use several worksheets depending on your configuration.

40

Post Installation Tasks

Image 40
Contents Deployment Guide 2011 Rev. A01 Contents ISCSI Configuration Worksheet Disk Configuration UtilityMicrosoft Windows Host Setup Uninstalling Dell PowerVault MD StorageUninstalling PowerVault MD Storage Software Configure the iSCSI Ports onConfigure Host Access Configure Chap Authentication onAppendix-Load Balancing Connect to the Target Storage Array FromSystem Requirements IntroductionManagement Station Requirements Introduction to Storage Arrays Introduction Introduction Hardware Installation Planning the Storage ConfigurationRedundant and Non-Redundant Configurations Connecting the Storage ArrayCabling the Storage Array Direct-Attached Configurations Single Path Data ConfigurationsFour Hosts Connected to a Single Controller Shows two hosts connected to a single controller array Eight Hosts in a Dual-Controller Configuration Dual-Path Data Configuration Four Hosts Connected to Two Controllers Four Hosts Connected in a Dual-Controller Configuration Network-Attached Configurations Servers Connected to a Single Controller Servers Connected to Two Controllers Cabling PowerVault MD1200 Series Expansion Enclosures Hardware Installation Click Tools→ Upgrade RAID Controller Module Firmware Click Advanced→ Maintenance→ Download→ EMM Firmware Installing PowerVault MD Storage Software Graphical Installation Recommended Select Install MD Storage Software Console Installation Silent InstallationUpgrading PowerVault MD Storage Software Installing PowerVault MD Storage Software Standard Terminology Used in iSCSI Configuration Definition Post Installation TasksBefore You Begin ISCSI Configuration Worksheet IPv4 Settings Chap SecretIPv6 Settings Mutual Chap Target ChapFE80 0000 0000 Host Server Vs. Storage Array Configuring iSCSI on Your Storage ArrayManager Storage Array Configuration Host Configuration Host Connectivity Configuration Configure the Storage Array Using PowerVault Mdcu Post Installation Tasks Post Installation Tasks Post Installation Tasks Configure the Host Connectivity Using PowerVault Mdcu Source Port Selection for iSCSI Host Ports Automatic Selection Post Connection Establishment Steps Guidelines for Configuring Your Network for iSCSI Microsoft Windows Host SetupControl Panel, select Network connections Linux Host Setup Edit the /etc/sysconfig/network fileHWADDR=XXXXXXXXXXXX GATEWAY=192.168.1.1 Uninstalling PowerVault MD Storage Software Click Change/RemoveUninstalling PowerVault MD Storage Software From Linux Run the file Uninstall Dell MD StorageAppendix-Manual Configuration of iSCSI Table A-1. Host Server Vs. Storage ArrayDefault Management Port Settings Discover the Storage Array Out-of-band Management OnlyAutomatic Storage Array Discovery Setting Up the ArrayManual Storage Array Discovery Configure the iSCSI Ports on the Storage Array Table A-2. Initial Setup Tasks Dialog Box PurposeAppendix-Manual Configuration of iSCSI Perform Target Discovery From the iSCSI Initiator Set the iSCSI initiator service to start automatically Configure Host Access Understanding Chap Authentication What is CHAP?Target Chap Mutual ChapChap Definitions Configure Chap Authentication on the Storage Array OptionalTable A-3. Chap Types Defined Description Configuring Target Chap Authentication on the Storage Array Table A-4. Chap Setting Option DescriptionConfigure Chap Authentication on the Host Server Optional Configuring Mutual Chap Authentication on the Storage ArrayIf you are using Windows Server 2008 Core version Add the target portal with Chap defined Discovery.sendtargets.auth.authmethod = Chap Connect to the Target Storage Array From the Host Server Local Adapter-Must be set to Microsoft iSCSI Initiator TCPPortNumberOfTargetPortal is For example, your log on command might look like this Optional Set Up In-Band Management Appendix-Using Internet Storage Naming Service Appendix-Using Internet Storage Naming Service Load Balance Policy Appendix-Load BalancingRound Robin With Subset Least Path Weight With Subset Least Queue Depth With SubsetIncreasing Bandwidth With Multiple iSCSI Sessions TCP Connections ISCSI SessionsAppendix-Load Balancing Appendix-Load Balancing Appendix-Stopping and Starting iSCSI Services in Linux Appendix-Stopping and Starting iSCSI Services in Linux
Related manuals
Manual 22 pages 36.51 Kb Manual 268 pages 25.67 Kb

MD3200i, MD3220i specifications

The Dell MD3220i and MD3200i are part of Dell's extensive line of modular storage solutions, designed to support organizations in optimizing their data management and scalability requirements. These models offer reliable performance and flexible features, making them suitable for various workloads including virtualization, cloud storage, and disaster recovery.

One of the standout features of the MD3220i and MD3200i is their support for iSCSI storage networking. By utilizing the Internet Small Computer Systems Interface (iSCSI) protocol, these systems provide organizations with a cost-effective way to connect their storage over existing network infrastructure, enabling efficient data transfers and management.

Both models are equipped with dual controllers that ensure high availability and failover capabilities, which are crucial for meeting uptime requirements in mission-critical environments. The dual controllers also facilitate load balancing and increase overall system performance, as they allow multiple paths to the storage, enhancing I/O performance.

Scalability is another key characteristic of the MD3220i and MD3200i. These storage arrays can be expanded to meet growing storage demands, supporting up to 240TB of raw capacity with up to 16 additional expansion enclosures. This flexibility allows organizations to start with a smaller configuration and grow their storage capabilities without a complete overhaul of the existing infrastructure.

The units also support multiple disk types, including traditional spinning disks, solid-state drives (SSDs), and a combination of both. This versatility enables users to tailor storage configurations to their specific performance and budgetary needs. Furthermore, the systems feature advanced data management technologies such as snapshots and remote replication, providing essential tools for data protection.

With their ease of management, the MD3220i and MD3200i are designed for straightforward configuration and operation. The intuitive management interfaces allow IT professionals to monitor performance, configure storage, and manage data effectively, ensuring businesses can maintain optimal system availability.

In summary, the Dell MD3220i and MD3200i are robust, scalable, and versatile storage solutions that cater to diverse organizational needs. Their integrated technologies, such as iSCSI support, dual controller architecture, and advanced data management features, make them an ideal choice for modern data centers looking to enhance storage capabilities while ensuring reliability and performance.