Dell manual CX4-480 storage system Sw1 Cabling Your Cluster Hardware

dConnect a cable from Fibre Channel switch 0 (sw0) to the second front-end fibre channel port on SP-B.

eConnect a cable from Fibre Channel switch 1 (sw1) to the third front- end fibre channel port on SP-A.

fConnect a cable from Fibre Channel switch 1 (sw1) to the third front- end fibre channel port on SP-B.

gConnect a cable from Fibre Channel switch 1 (sw1) to the fourth front-end fibre channel port on SP-A.

hConnect a cable from Fibre Channel switch 1 (sw1) to the fourth front-end fibre channel port on SP-B.

NOTE: Additional cables can be connected from the fibre channel switches to the storage system if there are available front-end fibre channel ports on the storage processors.

Figure 2-11. Cabling a SAN-Attached Cluster to the Dell/EMC CX4-480

cluster node 1

HBA ports (2)

0 1

cluster node 2
HBA ports (2)
0	1

sw0

SP-B SP-A

3	3	1	3	3	1
2	2		2	2
1	1	0	1	1	0
0	0		0	0

CX4-480 storage system

sw1

Cabling Your Cluster Hardware

31