Configuring The Remote Access Device To Use A Serial Over LAN Connection
To configure the BMC/iDRAC for communication over a serial over LAN (SOL) connection:
1.Click the Modular Enclosure → System/Server Module → Main System Chassis/Main System → Remote Access object.
2.Click the Configuration tab.
3.Click Serial Over LAN .
The Serial Over LAN Configuration window appears.
4.Configure the following details:
•Enable Serial Over LAN
•Baud Rate
•Minimum Privilege Required
5.Click Apply Changes.
6.Click Advanced Settings to further configure BMC.
7.In the Serial Over LAN Configuration Advanced Settings window, you may configure the following information:
•Character Accumulate Interval
•Character Send Threshold
8.Click Apply Changes.
9.Click Go Back to Serial Over LAN Configuration to return to the Serial Over LAN Configuration window.
Additional Configuration For iDRAC
To configure the IPv4 and IPv6 properties using the Additional Configuration tab:
1.Click the Modular Enclosure→ System/Server Module → Main System Chassis/Main System→ Remote Access object
2.Click the Configuration tab.
3.Click Additional Configuration.
4.Configure the IPv4 and IPv6 properties as Enabled or Disabled.
5.Click Apply Changes.
NOTE: For information about license management, see the Dell License Manager User’s Guide available at dell.com/openmanagemanuals.
Configuring Remote Access Device Users
To configure Remote Access Device users using the Remote Access page:
1.Click the Modular Enclosure → System/Server Module → Main System Chassis/Main System → Remote Access object.
2.Click the Users tab.
66