Chapter 4 - LED Patterns | 13 |
Chapter 4 - LED Patterns
Some of the LEDs on the front of the VSR multigigabit switching router serve dual functions. In addition to indicating certain
ϖNote: Any continuous flashing pattern not noted in this chapter may be caused by a hard- ware failure. Please call Compatible Systems Technical Support if your router shows a hard- ware failure.
Router LED Patterns
The following LEDs and light patterns provide information about the VSR’s physical state and operating conditions.
Over Temp
The router is above the proper operating temperature. The filter needs changing. See the appropriate VSR chassis section of the manual for instructions.
Sys Ready
The router booted properly without detecting any failures.
General Indicators
Ethernet Lights | T1 Lights | Indication |
|
|
|
5 flashing | 1 flashing | Router stacks starting up. |
|
|
|
3&4 flashing | 2&3 flashing | No OS loaded. Running from ROM. |
|
|
|
1&4 flashing | 2&5 flashing | Erasing OS in Flash ROM. |
|
|
|
5 flashing | 1,2&3 flashing | Erasing config in Flash ROM. |
|
|
|
1 - 5 scanning | 5 - 1 scanning | Flash ROM erase due to switch set- |
|
| ting five or six is complete. Set |
|
| switch to zero and cycle power. |
|
|
|