Black Box ServSensor V4E Lite, EME144A-R2 manual Expansion Ports, Sensors tab, extended port option

Page 40

Chapter 3: Installation

NOTE: As with all the other sensors, you can now set up the sound detector to be attached to a notification. Then, when your thresholds are broken, it will trigger a specified type of notification.

3.8 Expansion Ports

The ServSensor has two expansion ports that enable you to connect up to two daisychainable expansion modules. The available expansion modules are an 8-port intelligent sensor board (EME1X8) and an opto-isolated (16) dry-contact expansion module (EME1DC16). In this section, we will go through the basic setup of the 8-port intelligent sensor board. If you need information on specific functions of a particular sensor or expansion board, then please refer to the relevant manual for that product.

1.Plug the expansion board into one of the two ports located on the front panel of the unit. These are numbered E1 and E2. See Figure 3-50.

Figure 3-50. Plug expansion boards into these ports.

2. From the summary page, navigate to the “Sensors” tab. Then click “Extended port” as outlined in Figure 3-51.

Figure 3-51. Sensors tab, extended port option.

Page 40

724-746-5500 blackbox.com

EME144A-R2

 

 

Image 40
Contents ServSensor V4E Lite Trademarks Used in this Manual Trademarks Used in this ManualFCC and IC RFI Statements NOM Statement Table of Contents Specifications SpecificationsOverview Introduction OverviewWhat’s Included Hardware Description Front PanelBack Panel Installation Installation Setting Up the IP AddressInstallation Testing the New IP Address with the Ping Command MS-DOS window Firmware Upgrade Settings tab10. Firmware Upgrade Rebooting screen Installation Multi-users and Groups Setup Group Setup 14. GroupsInstallation User Setup 18. User Setup screenInstallation Services and Security Active Services Application Disabling 21. Properties buttonClosing or Changing Ports Disabling Http and Enabling Https SNMPv3 SSL Security Feature Active Security 25. Select SSL Key screenNAC or Network Access Control Security Feature Setting Up a SensorInstallation Notification Thresholds 30. Sensors34. Sensor Offline screen Advanced Sensor Settings 35. Select Sensor Type screenAdvanced Mode Functions 40. Advanced settings, data collection type Installation Installation Installation 45. Advanced Settings, Check Rate of Change screen 46. Enable Calendar Status screen Using an Internal Mic as a Sound Detection Sensor 47. Enable Calendar screen48. Sound Detector tab Installation Expansion Ports 51. Sensors tab, extended port optionInstallation 54. Notification Thresholds Notifications NotificationsAdding a Notification Snmp Trap Add an Snmp trapParameter Selection, screen #1 Notifications tab Select the Snmp parameters Mail 11. E-mail Action Wizard screen12. Input e-mail name and message Notifications Notifications Notifications SMS Notification 21. Snmp Trap and E-mail Notificiations screenNotifications Notifications 28. Choose board and sensor Notifications Notifications Mapping MappingAdding a Map Enter map name Choose to have the map as a top-level map Mapping Mapping Monitoring via the Map Interface 10. Save changesFilters Filters Sensor FiltersSummary Syslog Filters Filters Saved syslog filters display Making the ServSensor Visible on the Internet Making the ServSensor Visible on the InternetFrequently Asked Questions FAQs Frequently Asked Questions FAQsLED patterns in Normal mode LED patterns in Safe mode Frequently Asked Questions FAQs Activate Dhcp Select change password option Change the password Frequently Asked Questions FAQs Frequently Asked Questions FAQs Frequently Asked Questions FAQs Blackbox.com Black Box Tech Support FREE! Live /7 About Black Box