Black Box ServSensor V4E Lite, EME144A-R2 manual Firmware Upgrade, Settings tab

Page 14

Chapter 3: Installation

3.3 Firmware Upgrade

Make sure you are running the latest firmware. Please contact Black Box Technical Support at 724-746-5500 or info@blackbox.com for the latest firmware.

NOTE: This manual refers to the Default IP address, 192.168.0.100. Substitute this for your own IP address if you have changed the default IP address.

This tutorial gives you the information you need to upgrade the firmware.

To get to the tutorial’s starting point:

•Log in as administrator.

•Click the “Settings” tab.

Figure 3-7. Settings tab.

Page 14	724-746-5500 blackbox.com	EME144A-R2
		EME144A-R2

Image 14

Contents ServSensor V4E Lite Trademarks Used in this Manual Trademarks Used in this ManualFCC and IC RFI Statements NOM Statement Table of Contents Specifications SpecificationsWhat’s Included OverviewOverview Introduction Hardware Description Front PanelBack Panel Installation Installation Setting Up the IP AddressInstallation Testing the New IP Address with the Ping Command MS-DOS window Firmware Upgrade Settings tab10. Firmware Upgrade Rebooting screen Installation Multi-users and Groups Setup Group Setup 14. GroupsInstallation User Setup 18. User Setup screenInstallation Services and Security Active Services Application Disabling 21. Properties buttonClosing or Changing Ports Disabling Http and Enabling Https SNMPv3 SSL Security Feature Active Security 25. Select SSL Key screenNAC or Network Access Control Security Feature Setting Up a SensorInstallation Notification Thresholds 30. Sensors34. Sensor Offline screen Advanced Sensor Settings 35. Select Sensor Type screenAdvanced Mode Functions 40. Advanced settings, data collection type Installation Installation Installation 45. Advanced Settings, Check Rate of Change screen 46. Enable Calendar Status screen Using an Internal Mic as a Sound Detection Sensor 47. Enable Calendar screen48. Sound Detector tab Installation Expansion Ports 51. Sensors tab, extended port optionInstallation 54. Notification Thresholds Adding a Notification NotificationsNotifications Snmp Trap Add an Snmp trapParameter Selection, screen #1 Notifications tab Select the Snmp parameters Mail 11. E-mail Action Wizard screen12. Input e-mail name and message Notifications Notifications Notifications SMS Notification 21. Snmp Trap and E-mail Notificiations screenNotifications Notifications 28. Choose board and sensor Notifications Notifications Adding a Map MappingMapping Enter map name Choose to have the map as a top-level map Mapping Mapping Monitoring via the Map Interface 10. Save changesFilters Filters Sensor FiltersSummary Syslog Filters Filters Saved syslog filters display Making the ServSensor Visible on the Internet Making the ServSensor Visible on the InternetFrequently Asked Questions FAQs Frequently Asked Questions FAQsLED patterns in Normal mode LED patterns in Safe mode Frequently Asked Questions FAQs Activate Dhcp Select change password option Change the password Frequently Asked Questions FAQs Frequently Asked Questions FAQs Frequently Asked Questions FAQs Blackbox.com Black Box Tech Support FREE! Live /7 About Black Box