Using ESP Manager
Step 5: Enter the IP Address assigned to the desired Serial Server or click Search all reachable servers, then OK. IP Address is used to find Serial Server units that are not on the same subnet. (Routers on the network will block the standard broadcast used to find servers if Search all reachable servers is selected.) The user must set an IP address that conforms to the LAN addressing scheme.
The Searching window is shown until all active Serial Servers on the LAN are listed in the Serial Server List window.
Figure 23. The Search VLINX ESP Dialogue Box
Configure Server Properties
The Server Properties window displays the current configuration properties for the currently selected server.
Step 6: To open the Server Properties window, highlight the Serial Server in the Serial Server List window,
The Server Properties window is used to configure and store the Server configuration settings. Details for setting Properties are described in the next chapter.
Manual Documentation Number: | Chapter 4 | 27 |
Using ESP Manager
Figure 24. The Server Properties Window
Note:
ESP Manager Navigation:
-Use the mouse to select the property and parameters or
-Tab to move to the next property
-Tab+Shift to move back to previous property
-Arrows to move between properties or change values or contents of the current property
-Enter to select update or cancel
Step 7: After configuring as needed, click Update to store the configuration in the server. The following window will appear:
Figure 25. The Restart Dialogue Box
Step 8: Click Yes to restart. The following dialogue box will appear:
28 | Chapter 4 | Manual Documentation Number: |
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph | – | B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph | – |
B&B Electronics Ltd – Westlink Commercial Pk – Oranmore, Galway, Ireland – Ph +353 | – | B&B Electronics Ltd – Westlink Commercial Pk – Oranmore, Galway, Ireland – Ph +353 | – |