B&B Electronics RS-422, RS-485, RS-232, Multi-Interface Ethernet Serial Servers manual Web Server

Page 25

Server Properties Configuration

 

Server Properties Configuration

Web Server Interface

The Web Server interface provides the same updating options as Console Mode and Telnet. These are located at the bottom of all three Web Server pages. If a field is changed, you must click Save before leaving that page or the changes will be ignored.

Figure 37. The Web Server Page

Note:

If you leave any Web Server page without saving, any changes you have made will be ignored.

Manual Documentation Number: ESP901-902_4105m

Chapter 5

41

42

Chapter 5

Manual Documentation Number: ESP901-902_4105m

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104

www.bb-elec.com

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104

www.bb-elec.com

B&B Electronics Ltd – Westlink Commercial Pk – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445

www.bb-europe.com

B&B Electronics Ltd – Westlink Commercial Pk – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445

www.bb-europe.com

Image 25 Contents
Multi-Interface Ethernet Serial Servers Manual Documentation Number ESP901-9024105m Table of Contents Using Console Mode Introduction FeaturesVirtual COM Mode Direct IP ModePaired Mode Communication ModesSoftware Installation Hardware SetupSerial Server Configuration Serial Server Quick Start GuideCheck Communications Install Virtual COM Ports on PCESP901/ESP902 Connections, Indicators and Reset Switch Package ChecklistMaking the Hardware Connections Serial Server/Port Operational Modes DIP SwitchesSerial Ports Upgrade Mode Console ModeRS-232 Mode RS-422 ModeDTE Serial Server Serial Port Connector Pin-outsSoftware Installation Installing the Vlinx ESP SoftwareAutomatic Installation Manual InstallationOpening the ESP Manager Updating an Existing InstallationHardware Setup Using ESP ManagerSoftware Setup Menus Software OverviewServer Icons Pane Search for ServersSerial Server / Virtual COM Lists Status BarSearch Vlinx ESP Dialogue Box Configure Server PropertiesRestarting Dialogue Box Password Configuring the Serial Server PropertiesDescription of the Server Properties Server NameNetmask IP AddressGateway MAC AddressTCP Alive Timeout Serial TimeoutConnection Mode Flow ControlUpdate/Save Serial Port ModePort Status TCP/UDP PortFollowing dialogue box will appear Web Server Virtual COM Port Installation Installing Virtual COM PortsWindows Logo Testing Window Matching the Serial Server and Virtual COM Port SettingsVlinx ESP COM3 Properties Window Removing Virtual COM Ports Removing the Virtual COM Port using Device ManagerRemoving the Virtual COM port with ESP Manager Control Panel Window Downloading the Firmware Upgrading the Serial Server FirmwareUpgrading Via ESP Manager Preparing the SoftwareConsole Mode Setup Using Console ModeNavigating the Configuration Menus Saving and Restarting the Configuration Using a PasswordSetting Server Properties Using the WEB ServerWeb Server Operation Configuration Using Telnet Using TelnetNavigating the Configuration Menu Telnet Configuration Screens ESP901 and ESP902 Technical DataDhcp RS-232 Straight-through Cable Connections Serial Server DB-9 Pin-outs in RS-232 ModeRS-232 Crossover null modem Cable Connections RS-232 DTE Loopback Connections RS-232 Crossover DB-9 to DB-25 Conversion ConnectionsAppendix B RS-422 Connections Serial Server DB-9 Pin-outs in RS-422 ModeLoopback Connections for RS-422 Appendix C RS-485 Connections Serial Server DB-9 Pin-out in RS-485 ModeCrossover Ethernet Cable RJ-45 Pin-out Standard Ethernet Cable RJ-45 Pin-outElectronics October
Related manuals
Manual 61 pages 14.7 Kb Manual 46 pages 1.37 Kb Manual 39 pages 36.61 Kb