Server Properties Configuration
Figure 33. The Restart Dialogue Box
The following dialogue box will appear:
Figure 34. The Restarting Dialogue Box
After eight seconds a dialogue box will ask whether you want to search for all reachable servers again.
Figure 35. The Server Search Dialogue Box
While the Serial Server is searching for all reachable servers the following dialogue box appears:
Figure 36. The Search VLINX ESP Dialogue Box
Manual Documentation Number: | Chapter 5 | 39 |
Server Properties Configuration
After that port has been updated you may want to
Saving Configuration Data in Console Mode or Telnet
Saving (updating) server properties is done from the Configuration screen. Access the Configuration screen by tabbing through the list of screens on the left side of the window and highlighting Configuration.
There are four options shown on the right side of the Configuration screen: Save, Default, Running and Reset. Use Tab, Backspace, or arrow keys to move the cursor to the option position, then press Enter.
•Console Mode and Telnet Configuration Screens
•Save stores the configuration data to the Serial Server flash memory and resets it.
•Default restores the configuration data to factory default settings.
•Running restores the configuration data to the last values stored in the flash memory.
•Reset
40 | Chapter 5 | Manual Documentation Number: |
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph | – | B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph | – |
B&B Electronics Ltd – Westlink Commercial Pk – Oranmore, Galway, Ireland – Ph +353 | – | B&B Electronics Ltd – Westlink Commercial Pk – Oranmore, Galway, Ireland – Ph +353 | – |