Compatible Systems What You Will Need To Get Started, Supplied with the MicroRouter 2270R

Page 12

6

Chapter 2 - Getting Started

What You Will Need To Get Started

Before connecting the MicroRouter 2270R, please check the list below to make sure that you have received all of the items that are supplied with the MicroRouter 2270R package.

You should also make sure you have any additional items that are necessary to connect the router to your network.

Supplied with the MicroRouter 2270R

Please check your shipping package for the following items:

MicroRouter 2270R unit

Wall-mount power supply

One DB-25 male to DB-25 female data and console cable

CD-ROM including:

CompatiView software

Operating software

"HTML versions of product documentation (which can be viewed with your favorite web browser)

CompatiView Management Software Reference Guide

Text-Based Configuration and Command Line Management Refer- ence Guide

Warranty Registration card

Needed For Installation

Before connecting the MicroRouter 2270R to your network, you need to make sure that you have the necessary equipment for connecting to the local Ethernet(s) and the fractional or full T1 line, and/or a wide area transmission device (modem, 56K CSU/DSU, ISDN Terminal Adapter).

Image 12
Contents MicroRouter 2270R Installation Guide Page Network Installation IntroductionGetting Started Command Line Management Basic Configuration GuideFrame Relay Dlci Mappings IP Protocol Appendix a Shipping Defaults Systems Appendix E Terms and ConditionsIntroduction About the MicroRouter 2270RIntroduction MicroRouter 2270R Installation Overview Network Installation CompatiView Software Installation Command Line Preparation Basic Configuration GuidePage Warranty and Service Getting StartedFew Notes Please Read The ManualsNeeded For Installation What You Will Need To Get StartedSupplied with the MicroRouter 2270R Ethernet Connection Requirements T1 Line Connection RequirementsOther Telco Line Connection Requirements 10Base-T Twisted-Pair EthernetRS-232 Interface Network Installation Placing the RouterConnecting the Router to the Ethernet Connecting the Router to a T1 LineConnecting a Line Device to the Secondary Port Connecting to Twisted-Pair EthernetConnecting an Out-of-Band Management Console Powering Up the RouterPage Installation and Operation CompatiView for WindowsSystem Requirements Transport Protocols and CompatiView Command Line Management Out-of-Band Command Line ManagementTemporarily Reconfiguring a Host for Command Line Management Setting Up Telnet OperationSubnetMask, and IPBroadcast keywords in the IP Page Basic Configuration Guide Ethernet Interface ConfigurationIP Protocol IPX ProtocolRequired for IP Suggested for IPAppleTalk Protocol DECnet ProtocolWAN Interface Configuration Internal T1 CSU/DSU WAN 0 Physical Communications SettingsRS-232 WAN 1 Physical Communications Settings Internal T1 CSU/DSU WAN 0 Link Configuration RS-232 WAN 1 Link ConfigurationSuggested for Dedicated/Leased Line Operation Required for Dedicated/Leased Line OperationSuggested for Dial-On-Demand Operation IPX Protocol DECnet Protocol Frame Relay Configuration Frame Relay Dlci MappingsRequired for IP Numbered Interface IPX Protocol AppleTalk Protocol Saving a Configuration File to Flash ROM Smds AddressingPage Appendix a Shipping Defaults Default PasswordEthernet Interfaces WAN Interfaces Appendix B Connector and Cable Pin Outs Pin Outs for T1 Female Connector DTEPage Power On, No Traffic Ethernet Traffic Indicators Ethernet LED BarsWAN Indicators WAN LED Bar MicroRouter 2270R LED PatternsMicroRouter 2270R Switch Settings Appendix D Downloading Software From Compatible Systems Page Appendix E Terms Conditions Appendix E Terms and ConditionsAppendix E Terms and Conditions Appendix E Terms and Conditions