Compatible Systems 2270R manual Saving a Configuration File to Flash ROM, Smds Addressing

Page 37
Set Dedicated connection Set SMDS connection
Use configure and then set the Mode and ConnectMode keywords in the Link Config WAN 0.

Chapter 6 - Basic Configuration Guide

31

WAN 0 SMDS Configuration

This section covers the settings required for SMDS (Switched Multi-megabit Data Service) operation of the MicroRouter 2270R WAN 0 interface (IP only). SMDS is a connectionless, packet-switched service that offers LAN-to-LAN connectivity across a wide area at up to 1.544 Mbps. Note that the RS-232 (WAN 1) interface can be running Frame Relay or PPP while this interface is running SMDS, Frame Relay or PPP. SMDS addresses and other parameters can only be set using the command line interface.

Note: The IP protocol settings and the physical communication vsettings are the same as they would be for Frame Relay operation. The only parameters which should be set differently for SMDS are the Link Configuration and the SMDS addressing section.

Internal T1 CSU/DSU (WAN 0) Link Configuration

SMDS is presently supported in the MicroRouter 2270R only via synchronous dedicated line operation.

•

•

TB:

SMDS Addressing

Many of these parameters will be given to you by your service provider.

CV: Use Link Configuration: WAN 0 (and/other ports), select SMDS from the Link Type pull-down menu, and click on the SMDS button.

TB: Use configure and set the StationAddress, IPMulticast and PollingFrequency keywords in the SMDS WAN 0 (and/or other

ports) section.

Saving a Configuration File to Flash ROM

Once a configuration is complete, you can save it to the router’s Flash ROM. Until saved, all changes are made in a separate buffer and the actual router interfaces run as before the changes were made.

CV: Use the Save to/Device option from the File menu.

TB: Use the save command.

Page 36 Page 38
Image 37
Page 36 Page 38
Contents MicroRouter 2270R Installation Guide Page Introduction Network InstallationGetting Started Basic Configuration Guide Command Line ManagementFrame Relay Dlci Mappings IP Protocol Systems Appendix E Terms and Conditions Appendix a Shipping DefaultsAbout the MicroRouter 2270R IntroductionIntroduction MicroRouter 2270R Installation Overview CompatiView Software Installation Network InstallationCommand Line Preparation Basic Configuration GuidePage Getting Started Warranty and ServiceFew Notes Please Read The ManualsWhat You Will Need To Get Started Needed For InstallationSupplied with the MicroRouter 2270R T1 Line Connection Requirements Ethernet Connection RequirementsOther Telco Line Connection Requirements 10Base-T Twisted-Pair EthernetRS-232 Interface Placing the Router Network InstallationConnecting the Router to a T1 Line Connecting the Router to the EthernetConnecting a Line Device to the Secondary Port Connecting to Twisted-Pair EthernetPowering Up the Router Connecting an Out-of-Band Management ConsolePage CompatiView for Windows Installation and OperationSystem Requirements Transport Protocols and CompatiView Out-of-Band Command Line Management Command Line ManagementSetting Up Telnet Operation Temporarily Reconfiguring a Host for Command Line ManagementSubnetMask, and IPBroadcast keywords in the IP Page Ethernet Interface Configuration Basic Configuration GuideIPX Protocol IP ProtocolRequired for IP Suggested for IPDECnet Protocol AppleTalk ProtocolInternal T1 CSU/DSU WAN 0 Physical Communications Settings WAN Interface ConfigurationRS-232 WAN 1 Physical Communications Settings RS-232 WAN 1 Link Configuration Internal T1 CSU/DSU WAN 0 Link ConfigurationSuggested for Dedicated/Leased Line Operation Required for Dedicated/Leased Line OperationSuggested for Dial-On-Demand Operation IPX Protocol DECnet Protocol Frame Relay Dlci Mappings Frame Relay ConfigurationRequired for IP Numbered Interface IPX Protocol AppleTalk Protocol Smds Addressing Saving a Configuration File to Flash ROMPage Default Password Appendix a Shipping DefaultsEthernet Interfaces WAN Interfaces Pin Outs for T1 Female Connector DTE Appendix B Connector and Cable Pin OutsPage Ethernet Traffic Indicators Ethernet LED Bars Power On, No TrafficWAN Indicators WAN LED Bar MicroRouter 2270R LED PatternsMicroRouter 2270R Switch Settings Appendix D Downloading Software From Compatible Systems Page Appendix E Terms and Conditions Appendix E Terms ConditionsAppendix E Terms and Conditions Appendix E Terms and Conditions

2270R specifications

The Compatible Systems 2270R is a state-of-the-art computing solution designed for organizations that demand efficiency and reliability in their operational tasks. Known for its versatility and performance, the 2270R has garnered attention for its robust features and advanced technologies.

One of the main highlights of the Compatible Systems 2270R is its powerful processing capabilities. Equipped with a high-performance multi-core processor, it ensures optimal performance for both single-threaded and multi-threaded applications. This makes it an ideal choice for demanding tasks such as data analysis, scientific computations, and real-time processing. The advanced architecture not only enhances the speed of operations but also improves energy efficiency.

The system comes standard with a generous amount of RAM, allowing for seamless multitasking. This means users can run multiple applications simultaneously without experiencing any slowdown. The ability to expand memory capacity also enables organizations to adapt the system to their growing needs.

Storage is another standout feature of the Compatible Systems 2270R. It offers multiple storage options, including high-speed solid-state drives (SSDs) and traditional hard disk drives (HDDs). This flexibility allows users to choose the best configuration for their specific requirements, whether they prioritize speed for faster data access or larger capacity for extensive data storage.

Connectivity options on the 2270R are extensive, featuring a variety of ports, including USB, HDMI, and Ethernet, among others. This ensures compatibility with a wide range of peripherals and network devices. The system also supports advanced wireless technologies, providing users with the flexibility to connect to networks seamlessly.

One of the defining characteristics of the Compatible Systems 2270R is its reliability. Built with high-quality components and robust thermal management, this system is designed to operate in various environments without failure. This reliability is essential for mission-critical applications where downtime can lead to significant consequences.

Furthermore, the Compatible Systems 2270R is designed with user accessibility in mind. It features an intuitive interface that simplifies the user experience, making it easier for both novice and experienced users to navigate its capabilities.

In summary, the Compatible Systems 2270R is a powerful and versatile computing solution that excels in processing power, memory capacity, storage options, and connectivity. Its reliability and user-friendly design make it a top choice for organizations looking to enhance their operational efficiency. Whether for advanced data processing or everyday tasks, the 2270R stands out as a dependable partner in the digital landscape.
Top Page Image Contents