Compatible Systems 2270R manual WAN Interface Configuration

Page 28

22

Chapter 6 - Basic Configuration Guide

 

 

Suggested for DECnet

Setting the parameters above should be adequate for most installations.

WAN Interface Configuration

In order to use a WAN interface, you may first need to set some phys- ical parameters and then set up the link and protocol parameters.

There are differences between the capabilities of the built-in T1 CSU/DSU WAN interface and the RS-232 WAN interface. The T1 interface can only be used with lines which run at fractional or full T1 rates. The RS-232 interface can be run synchronously or asynchro- nously, at rates up to 256Kbps (sync) or 230.4Kbps (async).

Internal T1 CSU/DSU (WAN 0) Physical Communications Settings

Required for Dedicated Line Operation

No changes from the default values are required for standard operation over a full T1. The default values are listed in Appendix A.

Suggested for Dedicated Line Operation

Changing to fractional T1, different coding or framing, etc., may be required for a particular installation.

CV: Use the Physical Configuration: WAN 0 Dialog Box.

TB: Use configure and the T1 Interface WAN 0 section.

RS-232 (WAN 1) Physical Communications Settings

You may need to set the baud rate, sync/async operation, and other physical communications parameters for the WAN interface. These parameters will depend on the line communications device you are using.

Note: Frame Relay is presently supported in the MicroRouter v2270R only via synchronous operation. An external clock signal is generated for Frame Relay.

CV: Use the Physical Configuration: WAN 1 Dialog Box.

TB: Use configure and set the LinkType keyword or other keywords in the RS232 Interface WAN 1 section.

Image 28
Contents MicroRouter 2270R Installation Guide Page Introduction Network InstallationGetting Started Command Line Management Basic Configuration GuideFrame Relay Dlci Mappings IP Protocol Appendix a Shipping Defaults Systems Appendix E Terms and ConditionsAbout the MicroRouter 2270R IntroductionIntroduction MicroRouter 2270R Installation Overview Network Installation CompatiView Software InstallationCommand Line Preparation Basic Configuration GuidePage Warranty and Service Getting StartedFew Notes Please Read The ManualsWhat You Will Need To Get Started Needed For InstallationSupplied with the MicroRouter 2270R Ethernet Connection Requirements T1 Line Connection RequirementsOther Telco Line Connection Requirements 10Base-T Twisted-Pair EthernetRS-232 Interface Network Installation Placing the RouterConnecting the Router to the Ethernet Connecting the Router to a T1 LineConnecting a Line Device to the Secondary Port Connecting to Twisted-Pair EthernetConnecting an Out-of-Band Management Console Powering Up the RouterPage CompatiView for Windows Installation and OperationSystem Requirements Transport Protocols and CompatiView Command Line Management Out-of-Band Command Line ManagementTemporarily Reconfiguring a Host for Command Line Management Setting Up Telnet OperationSubnetMask, and IPBroadcast keywords in the IP Page Basic Configuration Guide Ethernet Interface ConfigurationIP Protocol IPX ProtocolRequired for IP Suggested for IPAppleTalk Protocol DECnet ProtocolInternal T1 CSU/DSU WAN 0 Physical Communications Settings WAN Interface ConfigurationRS-232 WAN 1 Physical Communications Settings Internal T1 CSU/DSU WAN 0 Link Configuration RS-232 WAN 1 Link ConfigurationSuggested for Dedicated/Leased Line Operation Required for Dedicated/Leased Line OperationSuggested for Dial-On-Demand Operation IPX Protocol DECnet Protocol Frame Relay Configuration Frame Relay Dlci MappingsRequired for IP Numbered Interface IPX Protocol AppleTalk Protocol Saving a Configuration File to Flash ROM Smds AddressingPage Default Password Appendix a Shipping DefaultsEthernet Interfaces WAN Interfaces Appendix B Connector and Cable Pin Outs Pin Outs for T1 Female Connector DTEPage Power On, No Traffic Ethernet Traffic Indicators Ethernet LED BarsWAN Indicators WAN LED Bar MicroRouter 2270R LED PatternsMicroRouter 2270R Switch Settings Appendix D Downloading Software From Compatible Systems Page Appendix E Terms Conditions Appendix E Terms and ConditionsAppendix E Terms and Conditions Appendix E Terms and Conditions

2270R specifications

The Compatible Systems 2270R is a state-of-the-art computing solution designed for organizations that demand efficiency and reliability in their operational tasks. Known for its versatility and performance, the 2270R has garnered attention for its robust features and advanced technologies.

One of the main highlights of the Compatible Systems 2270R is its powerful processing capabilities. Equipped with a high-performance multi-core processor, it ensures optimal performance for both single-threaded and multi-threaded applications. This makes it an ideal choice for demanding tasks such as data analysis, scientific computations, and real-time processing. The advanced architecture not only enhances the speed of operations but also improves energy efficiency.

The system comes standard with a generous amount of RAM, allowing for seamless multitasking. This means users can run multiple applications simultaneously without experiencing any slowdown. The ability to expand memory capacity also enables organizations to adapt the system to their growing needs.

Storage is another standout feature of the Compatible Systems 2270R. It offers multiple storage options, including high-speed solid-state drives (SSDs) and traditional hard disk drives (HDDs). This flexibility allows users to choose the best configuration for their specific requirements, whether they prioritize speed for faster data access or larger capacity for extensive data storage.

Connectivity options on the 2270R are extensive, featuring a variety of ports, including USB, HDMI, and Ethernet, among others. This ensures compatibility with a wide range of peripherals and network devices. The system also supports advanced wireless technologies, providing users with the flexibility to connect to networks seamlessly.

One of the defining characteristics of the Compatible Systems 2270R is its reliability. Built with high-quality components and robust thermal management, this system is designed to operate in various environments without failure. This reliability is essential for mission-critical applications where downtime can lead to significant consequences.

Furthermore, the Compatible Systems 2270R is designed with user accessibility in mind. It features an intuitive interface that simplifies the user experience, making it easier for both novice and experienced users to navigate its capabilities.

In summary, the Compatible Systems 2270R is a powerful and versatile computing solution that excels in processing power, memory capacity, storage options, and connectivity. Its reliability and user-friendly design make it a top choice for organizations looking to enhance their operational efficiency. Whether for advanced data processing or everyday tasks, the 2270R stands out as a dependable partner in the digital landscape.