Compatible Systems 1270i Connecting an Out-of-Band Management Console, Powering Up the Router

Page 17

Chapter 3 - Network Installation

11

 

 

Note: The MicroRouter 1270i RS-232 interfaces require that your vasynchronous line communications device be set to supply the RS-232 DCD signal when a connection has been made. A synchronous RS-232 device should be set to provide DSR.

Note: The MicroRouter 1270i includes a special cable to facilitate vconnections to RS-232 line communications devices. This cable includes support for several asynchronous and synchronous control signals. Off-the-shelf cables generally do not support these signals.

Connecting an Out-of-Band Management Console

If you wish to connect an out-of-band management console, use the supplied cable and connect to the Console interface on the back of the MicroRouter 1270i. You can use a dumb terminal or a computer equipped with VT100 terminal emulation.

The default settings for the Console interface are VT100 terminal emulation, 9600 bps, 8 bits, no parity, 1 stop bit, no Flow Control.

Powering Up the Router

Power up any modem, CSU/DSU, or TA before powering up the router. This allows the router to immediately sense whether its secondary inter- face is connected. The exception to this rule is when connecting an RS232 interface to a CSU/DSU. In such a case, you must power up the router before powering up the CSU/DSU. At power-up, the router will take approximately one minute to become visible to CompatiView.

Note: If you want to use Telnet as a management method, you must vfirst configure an IP address into the router using an out-of-band console, or reconfigure the IP address on an IP host or workstation on the same Ethernet segment as the router. See Chapter 5 - Command Line Management for more information.

Page 16 Page 18
Image 17
Page 16 Page 18
Contents MicroRouter Installation Guide Page Getting Started Network InstallationIntroduction Basic Configuration Guide Command Line ManagementWAN Interfaces Appendix a Shipping DefaultsMicroRouter 1270i LED Patterns Systems Appendix E Terms and ConditionsIntroduction IntroductionAbout the MicroRouter MicroRouter 1270i Installation Overview CompatiView Software Installation Network InstallationCommand Line Preparation Basic Configuration GuidePage Getting Started Warranty and ServiceFew Notes Please Read The ManualsSupplied with the MicroRouter Needed For InstallationWhat You Will Need To Get Started T1 Line Connection Requirements Ethernet Connection RequirementsOther Telco Line Connection Requirements 10Base-T Twisted-Pair EthernetRS-232 Interface Placing the Router Network InstallationConnecting the Router to a T1 Line Connecting the Router to the EthernetConnecting a Line Device to the Secondary Port Connecting to Twisted-Pair EthernetPowering Up the Router Connecting an Out-of-Band Management ConsolePage System Requirements Installation and OperationCompatiView for Windows Transport Protocols and CompatiView Out-of-Band Command Line Management Command Line ManagementSetting Up Telnet Operation Temporarily Reconfiguring a Host for Command Line ManagementCommand Line Management Page Ethernet Interface Configuration Basic Configuration GuideIPX Protocol IP ProtocolRequired for IP Suggested for IPRS-232 WAN 1 Physical Communications Settings WAN Interface ConfigurationInternal T1 CSU/DSU WAN 0 Physical Communications Settings RS-232 WAN 1 Link Configuration Internal T1 CSU/DSU WAN 0 Link ConfigurationSuggested for Dedicated/Leased Line Operation Required for Dedicated/Leased Line OperationSuggested for Dial-On-Demand Operation IPX Protocol Frame Relay Configuration Required for IP Numbered Interface Frame Relay Dlci MappingsIPX Protocol Smds Addressing Saving a Configuration File to Flash ROMEthernet Interfaces Appendix a Shipping DefaultsDefault Password IPX Defaults IP DefaultsT1 CSU/DSU WAN 0 Link & Physical Defaults RS-232 WAN 1 Link & Physical DefaultsPin Outs for T1 Female Connector DTE Appendix B Connector and Cable Pin OutsPage Ethernet Traffic Indicators Ethernet LED Bars Power On, No TrafficWAN Indicators WAN LED Bar MicroRouter 1270i LED PatternsMicroRouter 1270i Switch Settings Appendix D Downloading Software From Compatible Systems Page Appendix E Terms and Conditions Appendix E Terms ConditionsAppendix E Terms and Conditions Appendix E Terms and Conditions

1270i specifications

The Compatible Systems 1270i is a robust, high-performance computing solution designed for a variety of demanding applications. Featuring a powerful architecture, the 1270i is engineered to meet the needs of businesses seeking reliability, efficiency, and advanced technology in their IT infrastructure.

One of the key features of the 1270i is its multi-core processing capabilities. With up to 32 cores, this system delivers exceptional performance for parallel processing tasks, making it ideal for data-intensive operations in sectors such as finance, healthcare, and scientific research. The architecture also supports simultaneous multithreading, allowing for even greater efficiency and throughput.

Memory capacity is another standout attribute of the 1270i. It supports up to 2TB of RAM, accommodating large datasets and enhancing performance for applications that demand high memory bandwidth. This makes it particularly suitable for machine learning, big data analytics, and enterprise applications where data handling is critical.

In terms of storage, the 1270i offers flexible configurations with support for SSDs and HDDs, including NVMe drives for rapid data access and retrieval. This flexibility allows organizations to tailor their storage solutions based on performance needs and budget considerations, optimizing both speed and capacity.

The 1270i also integrates several cutting-edge technologies to bolster its functionality. Advanced cooling systems ensure the components maintain optimal temperatures, enhancing reliability and longevity. Power efficiency is prioritized as well, with intelligent management features that reduce energy consumption without sacrificing performance.

Networking capabilities are comprehensive, supporting various protocols and configurations to ensure seamless connectivity in diverse environments. With multiple high-speed Ethernet ports, the 1270i facilitates fast data transfer, crucial for collaborative workflows and real-time data processing.

Security is a fundamental aspect of the 1270i design. It incorporates hardware-based security features such as Trusted Platform Module (TPM) technology, providing a secure foundation for data protection and compliance with industry standards.

Overall, the Compatible Systems 1270i is a versatile and powerful computing solution that meets the demands of modern enterprises. Its combination of high processing power, large memory capacity, flexible storage options, and advanced security features positions it as a top choice for businesses seeking to enhance their IT infrastructure and drive innovation. Whether used for data analytics, application hosting, or any other critical business function, the 1270i stands out as a reliable and efficient solution.
Top Page Image Contents