Compatible Systems 1270i manual Saving a Configuration File to Flash ROM, Smds Addressing

Page 34
Set Dedicated connection Set SMDS connection
Use configure and then set the Mode and ConnectMode keywords in the Link Config WAN 0.

28

Chapter 6 - Basic Configuration Guide

WAN 0 SMDS Configuration

This section covers the settings required for SMDS (Switched Multi-megabit Data Service) operation of the MicroRouter 1270i WAN 0 interface (IP only). SMDS is a connectionless, packet-switched service that offers LAN-to-LAN connectivity across a wide area at up to 1.544 Mbps. Note that the RS-232 (WAN 1) interface can be running Frame Relay or PPP while this interface is running SMDS, Frame Relay or PPP. SMDS addresses and other parameters can only be set using the command line interface.

Note: The IP protocol settings and the physical communication vsettings are the same as they would be for Frame Relay operation. The only parameters which should be set differently for SMDS are the Link Configuration and the SMDS addressing section.

Internal T1 CSU/DSU (WAN 0) Link Configuration

SMDS is presently supported in the MicroRouter 1270i only via synchronous dedicated line operation.

TB:

SMDS Addressing

Many of these parameters will be given to you by your service provider.

CV: Use Link Configuration: WAN 0 (and/other ports), select SMDS from the Link Type pull-down menu, and click on the SMDS button.

TB: Use configure and set the StationAddress, IPMulticast and PollingFrequency keywords in the SMDS WAN 0 (and/or other

ports) section.

Saving a Configuration File to Flash ROM

Once a configuration is complete, you can save it to the router’s Flash ROM. Until saved, all changes are made in a separate buffer and the actual router interfaces run as before the changes were made.

CV: Use the Save to/Device option from the File menu.

TB: Use the save command.

Image 34
Contents MicroRouter Installation Guide Page Introduction Network InstallationGetting Started Command Line Management Basic Configuration GuideAppendix a Shipping Defaults WAN InterfacesSystems Appendix E Terms and Conditions MicroRouter 1270i LED PatternsAbout the MicroRouter IntroductionIntroduction MicroRouter 1270i Installation Overview Command Line Preparation Network InstallationCompatiView Software Installation Basic Configuration GuidePage Few Notes Warranty and ServiceGetting Started Please Read The ManualsWhat You Will Need To Get Started Needed For InstallationSupplied with the MicroRouter Other Telco Line Connection Requirements Ethernet Connection RequirementsT1 Line Connection Requirements 10Base-T Twisted-Pair EthernetRS-232 Interface Network Installation Placing the RouterConnecting a Line Device to the Secondary Port Connecting the Router to the EthernetConnecting the Router to a T1 Line Connecting to Twisted-Pair EthernetConnecting an Out-of-Band Management Console Powering Up the RouterPage CompatiView for Windows Installation and OperationSystem Requirements Transport Protocols and CompatiView Command Line Management Out-of-Band Command Line ManagementTemporarily Reconfiguring a Host for Command Line Management Setting Up Telnet OperationCommand Line Management Page Basic Configuration Guide Ethernet Interface ConfigurationRequired for IP IP ProtocolIPX Protocol Suggested for IPInternal T1 CSU/DSU WAN 0 Physical Communications Settings WAN Interface ConfigurationRS-232 WAN 1 Physical Communications Settings Suggested for Dedicated/Leased Line Operation Internal T1 CSU/DSU WAN 0 Link ConfigurationRS-232 WAN 1 Link Configuration Required for Dedicated/Leased Line OperationSuggested for Dial-On-Demand Operation IPX Protocol Frame Relay Configuration Frame Relay Dlci Mappings Required for IP Numbered InterfaceIPX Protocol Saving a Configuration File to Flash ROM Smds AddressingDefault Password Appendix a Shipping DefaultsEthernet Interfaces T1 CSU/DSU WAN 0 Link & Physical Defaults IP DefaultsIPX Defaults RS-232 WAN 1 Link & Physical DefaultsAppendix B Connector and Cable Pin Outs Pin Outs for T1 Female Connector DTEPage WAN Indicators WAN LED Bar Power On, No TrafficEthernet Traffic Indicators Ethernet LED Bars MicroRouter 1270i LED PatternsMicroRouter 1270i Switch Settings Appendix D Downloading Software From Compatible Systems Page Appendix E Terms Conditions Appendix E Terms and ConditionsAppendix E Terms and Conditions Appendix E Terms and Conditions

1270i specifications

The Compatible Systems 1270i is a robust, high-performance computing solution designed for a variety of demanding applications. Featuring a powerful architecture, the 1270i is engineered to meet the needs of businesses seeking reliability, efficiency, and advanced technology in their IT infrastructure.

One of the key features of the 1270i is its multi-core processing capabilities. With up to 32 cores, this system delivers exceptional performance for parallel processing tasks, making it ideal for data-intensive operations in sectors such as finance, healthcare, and scientific research. The architecture also supports simultaneous multithreading, allowing for even greater efficiency and throughput.

Memory capacity is another standout attribute of the 1270i. It supports up to 2TB of RAM, accommodating large datasets and enhancing performance for applications that demand high memory bandwidth. This makes it particularly suitable for machine learning, big data analytics, and enterprise applications where data handling is critical.

In terms of storage, the 1270i offers flexible configurations with support for SSDs and HDDs, including NVMe drives for rapid data access and retrieval. This flexibility allows organizations to tailor their storage solutions based on performance needs and budget considerations, optimizing both speed and capacity.

The 1270i also integrates several cutting-edge technologies to bolster its functionality. Advanced cooling systems ensure the components maintain optimal temperatures, enhancing reliability and longevity. Power efficiency is prioritized as well, with intelligent management features that reduce energy consumption without sacrificing performance.

Networking capabilities are comprehensive, supporting various protocols and configurations to ensure seamless connectivity in diverse environments. With multiple high-speed Ethernet ports, the 1270i facilitates fast data transfer, crucial for collaborative workflows and real-time data processing.

Security is a fundamental aspect of the 1270i design. It incorporates hardware-based security features such as Trusted Platform Module (TPM) technology, providing a secure foundation for data protection and compliance with industry standards.

Overall, the Compatible Systems 1270i is a versatile and powerful computing solution that meets the demands of modern enterprises. Its combination of high processing power, large memory capacity, flexible storage options, and advanced security features positions it as a top choice for businesses seeking to enhance their IT infrastructure and drive innovation. Whether used for data analytics, application hosting, or any other critical business function, the 1270i stands out as a reliable and efficient solution.