Workstation Configuration
ida ReRouter
40
Configuring SNA local node characteristics
Communications Manager Profile List Sheet
1. Select "SNA local node characteristics"
2. Select "Configure"
Local Node Characteristics
1. Set "Network ID" to, see worksheet ( 6)
2. Set "Local node name" to the number of your workstation
(from the host)
3. Set "Node type"
If set to "End node - to network node server", then also define
"Your network node server address” (hex)
4. Set "Local node ID" (the value for Local node ID should be
supplied to you by your local network support manager)
NOTE: Do not change the value X'05D' for the left-most field
of the local node ID.
5. Select "Options"
6. Set "Local node alias name".
7. Select: “Activate Attach Manager at Startup ”.
8. Click on "OK"
Configuring SNA connection
Communications Manager Profile List Sheet
1. Select "SNA connections"
2. Select "Configure"