Appendix Section ida ReRouter
Appendix A: Keyword Definitions
The configuration file - idaRoute.ini - created upon completion of the setup dialog (see section 4.2: Setup of ida ReRouter) consists of multiple route definitions. Each route definition is a set of keywords defining the actual setting of the route. The configuration file is not used for normal configuration and operation. For this you use the setup dialog screen.
The valid keywords are described in details below and the syntax for the keyword settings is as follows:
Syntax:
KEYWORD <SPACE> VALUE <CRLF>
NOTE: Keywords are case sensitive and must be stated in upper case.
Comments must be placed on a line above and below the settings line.
KEYWORD: | "DEFINE_ROUTE" |
DESCRIPTION: | Starts the definition of an LU 6.2 to |
| TCP/IP route |
RANGE: | - |
DEFAULT: | - |
KEYWORD:"END"
DESCRIPTION: | Ends the route definition |
RANGE:-
DEFAULT:-
70
